We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
Yes Seriously! You can build an easy bed frame yourself without any other’s help. As everyone knows the starting point of any bedroom is a gorgeous bed. However, you also need something that lets you enjoy peaceful slumber in comfort and warmth, but since the bed took as the focal point of the room, you may need something that looks really good too.
A bottle carrier is a bucket like carrier used to carry beer bottles and so. Yes, the same one you must have used to carry your six-pack. Drinker or not, a bottle carrier is a useful item for everyone. It can be used to carry around or store small items around a household. And it is also very easy to build one. I have several of these lying around my house. Also known as wooden beer totes, this is one wood item you will absolutely love to make. It is also super easy to build.
Slice, dice and serve in style on this easy, attractive board. We’ll show you a simple way to dry-fit the parts, scribe the arc and then glue the whole thing together. We used a 4-ft. steel ruler to scribe the arcs, but a yardstick or any thin board would also work. Find complete how-to instructions on this woodworking crafts project here. Also, be sure to use water-resistant wood glue and keep your board out of the dishwasher or it might fall apart. And one more thing: Keep the boards as even as possible during glue-up to minimize sanding later. For great tips on gluing wood, check out this collection.
$1250.00 (Includes all Materials)            . $300.00 Deposit (Balance due 30 days before class) In this class not only will we build this beautiful coffee table inspired by Greene and Greene, Stickley and a little bit of Krenov, but we will learn many table construction techniques. Reading wood grain, Mortise & tenon, shaping wood, bread board ends, drawer construction, fitting the drawer, as well as many of the Greene and Greene details such as square ebony…
Really nice projects but I wish they didn’t use machines every every single step not everyone has a full commercial shop with huge commercial sized machines that cost thousands of dollars in their house. They need to start focusing on hand tools what what the average person has in their house like table saw and drills and stuff like that not everyone has a massive router table with specialty fence and machine or a commercial band saw or massive commercial table saw or huge joiners and thickness planners. It’s not prectical for most people. The steps are short too like Ok do this whole section on this commercial machine that not average woodworker owns and only someone with a commercial company would even have access to but those people aren’t buying this book because they know how to do these things already they don’t need a book telling them how to do what the legit do as a career. The people buying this book are normal people trying to do this as a hobby for fun at home. So cater to them don’t take a short cut because it’s easy for you to tell someone to do something you can do in two seconds but those people have to somehow figure out how to do this one their own in a way not shown in the book because they don’t have the machines you do. It’s Being lazy and writing a book that’s almost completely useless to someone trying to make these projects. But if I did own all these machines and has all that space and money and materials it’s a good book.
Description: New to woodworking or looking to refresh your skills? What to see how someone else would do it? We have different Fundamentals classes where instructors teach you the skills to safely and properly use equipment, tools and jigs. In all classes you will learn about taking rough wood into a finished piece using the planer, jointer, mitersaw and tablesaw. In this class you will make a small sliding bookshelf.
Free next Tuesday evening? The Minneapolis store is offering a class on panel door construction August 1, from 5:00 to 9:00 pm.  You'll learn everything you need to know about this fundamental cabinetmaker's skill to make standard and arched top raised panel doors. August 5 at the Denver store, Cindy Drozda will offer instruction in the techniques she uses to produce her signature style lidded containers (see "Yemaya," above).  This is a great opportunity to learn from a master wood turner who has elevated the craft to the level of fine art.  Students will work on their own projects and most will take home a completed container. Also on August 5, the Phoenix store is offering an advanced turning class.  If you are an intermediate-level wood turner, this would be an excellent opportunity to sharpen your skills and learn techniques that go beyond the basics.
Description: This class is designed for beginning woodworkers or those who have been away from their hobby for some time. Students will have a chance to learn about different types of joints using both hand and power tools as they make their own take-home project. The course also covers subjects such as wood technology, selecting and purchasing lumber, sharpening techniques and finishing.
Making an art or a design on a wooden piece is a hectic task and requires good art skills. But there is another much easier way to carve a beautiful art on any wood surface. For this, you will need the image or graphic that you want to transfer, a piece of wood, freezer paper, etc. I, myself have made several such designs. At the source below, you can find a step by step guide for transferring a graphic image to the wood.
The video explains the step by step process of making a nice wooden phone stand from scratch. My first wooden holder was not the best one, but it was good enough to motivate me to make more. I now possess 10 mobile wooden stands in different shapes and styles. And if I can make this, you too can make one yourself. Search the internet for more mobile holder ideas and start making one now.
Using shelving in your room or kitchen is a great way to arrange and de-clutter space… I know, such ground-breaking term it is. Do not write me off yet, I just want to show you how you can build some clean floating corner shelving that appears to have no brackets. You can create them at no cost, and the hardest part of the plan is figuring out what you are going to put on these shelves when you are finished.

$1250.00 (Includes all Materials)                            . $300.00 Deposit (Balance due 30 days before class) In this class, we will cover different methods and techniques for cabinet construction. These methods can be applied to building kitchens, vanities, entertainment unit, build-in, home theaters or just a stand alone cabinet. We will build a cabinet using face frame, finish ends with frame and panel. We will cover topics such as door…
This is one of those things that you never know you need unless you have one. This amazing wooden sofa sleeve works perfectly on either or both sides of a sofa set. It gives your sofa a nice look. The sleeve can also be modified to include a cup holder, mobile holder, etc. You can easily find this item on any online furniture store, but an even better idea is to build one. This way, you can make a sofa sleeve design that you actually like and make space for cup and other things.
Description: In this class, Ray explains through demonstration the proper use, the making of all the joints used in 18th century furniture construction. The different types of dovetails, mortise and tenons, bridle joints, and others. While machine alternative methods will be discussed our focus will be on the use of hand tools to cut each joint. After watching the procedure demonstrated each student will be coached through their first attempt at each joint using their own hand tools. Learn how to properly and accurately layout and cut the perfect fitting joint! The best part is that these methods can be used on any style of furniture you wish to make ensuring they will last well over 200 years!
Turning an old door into a photo frame is another easy woodwork project. All you need is an old door and some woodworking tools and items. I am here sharing the link to the source tutorial that explains the step by step procedure for building a picture frame from an old wooden door. This tutorial was originally written by Tracy Snyder at athomewithsweett.blogspot.com who also tells you what items you may need and where to find them. If you haven’t already got an old door, you can purchase one from websites like Craigslist.
Making a garden arched footbridge out of some wood boards can be fun, hard working plan and also it’s quite rewarding. We are providing the project tutorial for how to build an arched footbridge without rails or having rails. If you take your hands of work and have some basic woodworking skills you can easily build this type of bridge. While this garden bridge is too small to walk over but it can make a really stunning addition to your lush yard or garden.
Description: Have you toyed with the idea of building your own cabinets for the kitchen, or the garage? And, as all woodworkers realize, the shop never has enough storage? If this synopsis connects with you, then Woodcraft's new Cabinet Making Series may fill the bill for you. The Cabinet Making Series is designed to maintain continuity by combining all the components of basic cabinetry in 17 hours (three sessions) of classroom and ptractical hands on instruction. Students will learn bisc fundamentals in how to choose and prepare stock to construct Base Units, Upper Wall Units, Drawers and Raised Panel Doors. Stock preparation will be accomplished utilizing the jointer, planer, electric miter saw, tablesaw and router table. Cabinet carcasses will be assembled using standard techniques and face frames will be assembled and attached using the Kreg Pocket Hole System. So, come on out, learn the techniques for making your own cabinets from the planning stage to ta finished product complete with drawers and doors.
Description: Learn how to create a unique beautiful piece of art, using one of the most versatile and useful tools in the shop. TheBand Saw Box is created from a block of wood that is either laminated or solid, containing drawers or hidden compartments. Students will learn how to plan, layout, cut, and craft an eye-catching project using a minimum of major woodworking tools. This project is a fun method that will increase your Band Saw skills and create fantastic gifts.
$700.00 (Includes all Materials)                 . $200.00 Deposit (Balance due 30 days before class) In this 4 day class you’ll be able to build this beautiful sharpening pond for your shop. I designed this pond to be a relaxing and stress free place to hone your tools as I believe sharp tools are so important in working wood. Not only are sharp tools a joy to use but they are also safer. In the…
$875.00 (Includes all Materials)         . $300.00 Deposit (Balance due 30 days before class) We have an exceptional opportunity offering a class taught by David A Wade, who had worked along side Sam Maloof for over 25 years. David sculpted many of Sam’s creations from the iconic sculpted rocking chair to the sculpted table. Many refer to sculpted Maloof pieces as “sensuous” and are drawn to touch his works. Every woodworker desiring to enhance their craft will benefit…

​Luckily, we have also managed to find a detailed video tutorial of the Barn door project that illustrates the process of building a Barn door of your own. The steps and instructions in the video tutorial are different from the source links listed above. Actually, you can make different types of designs for your Barn door depending on which one you can afford easily and DIY on your own.
×