Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
Description: This is a more in depth class about bench planes than above. In this class, let period furniture maker Ray Journigan show you how to make using a bench plane your new favorite go to tool. Lean what makes one plane better than another? Then Ray demonstrates the steps of flattening a wide board using hand planes followed by each student having the opportunity to surface a board to "finish ready" without any sanding using their hand planes. In this class we take the plane apart and explain all the adjustments to properly tune up your hand plane. Then block planes are discussed showing their importance in furniture work. Next, for those REALLY interested in learning how different types of handplanes were used, Ray will show and demonstrate the use of specialty planes such as Rabbit planes, Shoulder planes, Dado planes, Dovetail planes, Scraper planes, and molding planes. Lastly we turn our attention to sharpening to a razor edge. Student leave with an eye opening experience having learned thru practice, the joy and ease of using hand planes.
Building a Wooden Office Desk Organizer is an easy task for a professional woodworker, but not so much for normal people like you and me. But that doesn’t mean you cannot do this. Two years ago, I had almost no woodworking experience, but now I make most of my household and office wooden items by myself. This saves me a lot of money. And believe me when I say this; you can also manage to make wonderful wood items with a little practice and some woodworking experience.