$1555.00 (Includes all Materials)                        . $500.00 Deposit (Balance due 30 days before class) This is perhaps the most difficult class we offer at our school. This class is not for the faint hearted. This chair will challenge every area of your woodworking skill. We will be dealing with angles, proportion, chair design, choosing wood grain, sculpting of the crest rail using an angle grinder, inlay techniques for the back…
$875.00 (Includes all Materials)         . $300.00 Deposit (Balance due 30 days before class) We have an exceptional opportunity offering a class taught by David A Wade, who had worked along side Sam Maloof for over 25 years. David sculpted many of Sam’s creations from the iconic sculpted rocking chair to the sculpted table. Many refer to sculpted Maloof pieces as “sensuous” and are drawn to touch his works. Every woodworker desiring to enhance their craft will benefit…

This corner stone joint of western woodwork has also been used in the Japanese tradition for a long time. Class we will cover: sizing, proportioning, choice of angle, layout and cutting as well as where to use dovetails. You will see examples of full, half blind and blind dovetails. There will be a full cutting and assembly demonstration as well...
Aside from the privacy it offers, a latticework porch trellis is a perfect way to add major curb appeal to your home for $100 or less. The trellis shown here is made of cedar, but any decay-resistant wood like redwood, cypress or treated pine would also be a good option. Constructed with lap joints for a flat surface and an oval cutout for elegance, it’s a far upgrade from traditional premade garden lattice. As long as you have experience working a router, this project’s complexity lies mostly in the time it takes to cut and assemble. Get the instructions complete with detailed illustrations here.
$1250.00 (Includes all Materials)            . $300.00 Deposit (Balance due 30 days before class) In this class not only will we build this beautiful coffee table inspired by Greene and Greene, Stickley and a little bit of Krenov, but we will learn many table construction techniques. Reading wood grain, Mortise & tenon, shaping wood, bread board ends, drawer construction, fitting the drawer, as well as many of the Greene and Greene details such as square ebony…
I recently came across this beautiful wooden swing set, which was made in the shape of a boat. Cool, isn’t it? The very first look was enough for me to start loving it. Although I haven’t yet tried building one myself, I am definitely going to. Later I realized that you can also build a baby cradle with the same idea. After all, what can be more calming than the tender rocking of a boat? This swing set will surely help your child get more gentle sleep.
It might not be the easiest project in this list, but if you already have some experience with wood cutting and joinery, it won’t be any hassle at all. Thanks to the extremely detailed instructions it shouldn’t really be a problem even if you’re not very familiar with woodworking. This could actually be a great project for refining your woodworking skills as a beginner!

You can transfer a graphic on any wood piece of your choice, including a frame, top of a table, etc. The surface should be clean and big enough for the graphic paper. I am also sharing a video tutorial here that explains in detail the process of transferring any graphic to a wooden surface using a freezer paper. Just gather the items you need and follow this video to carve your favorite designs on your favorite wood items.
Description: Sharp tools make all aspects of woodworking more enjoyable. But keeping them sharp has been a point of frustration that has steered many away from using them. This class will teach the techniques needed to maintain a sharp edge on your flat bench tools. In this class, all methods of sharpening will be discussed i.e. water stones, oil stones, wet/dry sandpaper, diamond stones and motorized discs. The use of honing compounds and strops will also be discussed. Come out and gain the skill and confidence needed to put a razor edge on all your bench tools.
Description: One of the first hand held power tools every novice wood worker should have in their arsenal is the router. With an assortment of sharp cutter bits, the router will become one of the most used small power tools in the shop. Although highly versatile, the router can be very intimidating; due to its size and the speed and torque it develops. In the Router 101 class, students will learn how to choose a router, the types of bases used with the router, and the care and feeding (maintenance) of the router. Students will also learn about the categories of router bits, the components used to identify them, what goes into the making of a router bit, and what to look for in making a choice of which bit best meets their needs. So come on out, bring your router and bits if you have them and learn basic routing techniques and tips and tricks to enhance your routing skills.
Description: In this workshop, Ray explains the different types and uses of period layout tools. It amazes people to leans how few furniture "Plans" were used in 18th century work. Sketches were made and basic principles were applied to derive at their measurements for quick and efficient use of shop time. Learn what the term "Shop Math" means as Ray demonstrates how to figure out measurements without the use of a ruler.
With a variety of styles covering every skill-level, the Great Book of Woodworking Projects has something for everyone. Whether you want a challenging project that will beautify your home, such as a stunning Stickley chest of drawers, or you need a quick and easy project for a gift, such as a keepsake box or picture frame, you will find plans that will take a few hours or a weekend to complete.
Description: A foot stool is a great way to gain skills with hand tools. This useful piece of furniture can be used to rest the feet after a long day or as a sitting stool for that last arriving guest. In this class, after mastering mortise and tenons by hand, Ray will show you how to layout, cut, and shape Queen Anne cabriole legs without the need of a lathe. You may choose to carve ball & claw feet if you have already taken that class! Then, using rasp, spokeshaves, and scrapers, he will show you how to refine the curved shapes. For the more ambitious, Ray will demonstrate carving the applied scalloped shells that can be applied to the aprons and also how to execute the shell on the knees carved in the solid. You don't want to miss this one! It will take your woodworking to the next level! Now you will be ready to tackle the upcoming Queen Anne Side Chair! Tool List: You are encouraged to bring your general woodworking tools along with the following: For the Stool: 5/16" Mortise Chisel 1⁄4", 1⁄2", 3⁄4", 1" bench Chisels (If you have them) Mallet 6" or larger Rule Combination Square Tenon or Dovetail saw #49 or 50 Nicholson rasp or equalivant 10" Med cut cabinet file 8" Smooth cut wood file Spokeshave Square card scraper Smooth plane Block Plane Shoulder Plane Compass Carving parts: (optional): You are encouraged to bring your carving roll with chisels to include the following: 15/6mm v tool 7/14mm gouge (fishtail if purchasing) 2/12mm gouge 8/3mm gouge 2/30mm gouge 8/7mm gouge 5/8mm gouge (fishtail if purchasing) 8/10mm gouge 5/12mm gouge (fishtail if purchasing) 8/13mm gouge 5/25mm gouge 25/10mm Backbend gouge 7/6mm gouge (fishtail if purchasing) 7/10mm gouge (fishtail if purchasing)
This is definitely going to be one of the easiest woodworking projects you’ll be reading about today. So why not just get started? The tutorial link is given below. Just do exactly what they are saying in the tutorial and you will end up making a beautiful wooden doormat just like the one in the image above. They are using pine wood to build this doormat. You can choose any wood material that best suits your budget.

With a variety of styles covering every skill level, the Great Book of Woodworking Projects has something for everyone. Whether you want a challenging project that will beautify your home, such as a stunning Stickley chest of drawers, or you need a quick and easy project for a gift, such as a keepsake box or picture frame, you will find plans that will take a few hours or a weekend to complete.
A few days back, I was searching for some cool DIY plans. So, I got to work and ended up coming up with some easy to follow project and an awesome new ice chest cooler to have out on the deck! It was going to be perfect for summer hangouts and barbecues. It was a fun and practical plan to work on and I know you will have fun tackling select a design from this plan and start building your own. Enjoy learning how you can build a rustic cooler also sing the video tutorial and source tutorial plan!
The best thing about this wine rack is that it is very easy to build. All you need is the basic understanding of woodworking and a few tools to get started. You can modify your wine rack any way you want or build in a design or color different from this one. The basic steps to build a wooden wine rack are the same for all variants. I have included here the video tutorial that I followed in order to build myself a pallet wide rack.

Our instructors work out of a 27,000 square-foot facility, where over 100 stationary and portable woodworking machines are available. We emphasize hands-on training and real-world experience, and all classes are project-focused. Over forty different classes cover topics including faceframe and frameless cabinet construction, CNC woodworking, architectural millwork, table and casegood construction, hand tools, woodturning, and veneering.
$1,055.00 (Includes All Materials)         . Deposit $300.00  (Balance due 30 days before class) The secret to fine woodworking can be found in the pursuit of the fundamentals. With high-tech machines and power tools, these fundamentals can be overshadowed. In this class we will learn the values of design, drawings, mock-ups, sharpening, care and use of hand tools, tuning up a bench plane, layout, measuring tools, wood technology, choosing and preparing lumber, joinery (including hand cut dovetails and…
These things may be tiny in size, but building one is not that easy. It takes some serious woodworking knowledge and skill to build a nice wooden mobile stand. When I first saw one online, I just couldn’t resist thinking of buying one. But when I saw the price, I was forced to rethink. Also, a woodwork lover like me cannot be contained with just one piece and I was not willing to spend on more than one. So instead I decided to build myself one. Yes, it took some doing but the final result was satisfying. Luckily, I found this awesome tutorial online that helped me build my first ever wooden phone holder.
Another awesome thing about this coffee table is that it is also has a storage unit. So you can store drinks, and other stuff in the half barrel of your table and then close or open it whenever you need. Pete has also constructed a video for this tutorial for which you can find the link below. It illustrates the same process in a video guide that shows you the exact process to be followed while building this whiskey barrel coffee table.
$700.00 (Includes all Materials)                 . $200.00 Deposit (Balance due 30 days before class) In this 4 day class you’ll be able to build this beautiful sharpening pond for your shop. I designed this pond to be a relaxing and stress free place to hone your tools as I believe sharp tools are so important in working wood. Not only are sharp tools a joy to use but they are also safer. In the…
$375.00 (Includes all Materials)          . $100.00 Deposit  (Balance due 30 days before class) This class will give every student a thorough understanding of the finishing process. It will cover all aspects of wood finishing: Proper sanding techniques, coloring wood (dyes, stains, chemical and plant dyes), color-matching, membrane finishes (shellac, varnish, lacquer) and understanding solvents and their use in the finishing process. We will also explore hand-rubbed finishes, shading and toning, making your own custom stains and…
Learn the basics of woodworking with simple hands-on projects to build your confidence and skills. Each lesson in this class explores an area of woodworking that will form the building blocks of all future woodworking projects you undertake. Keeping the average DIY'er in mind, this entire class is conducted using basic handheld power tools, with no fancy fixed tools like table saws, lathes, planers, or drill presses.
The Nine-month Comprehensive is designed for aspiring professional furniture makers and dedicated amateurs who seek in-depth training at the highest standard of excellence. The hands-on, project-oriented format includes the full range of furniture making skills. Sequential projects take students from the fundamentals through the fine points of design and craftsmanship.
Description: In this workshop, period furniture maker Ray Journigan will explain what you will need to start adding carvings to you furniture. It all starts with the proper set up at the workbench. Ray explains the importance of good lighting. Watch Ray as he carves a scalloped shell to show the different body and hand Ray will also explain what is needed to keep those tools razor sharp. Face it, carving tools are expensive. Ray explains what makes a good carving chisel and which tools makes a good starter set. If you are new to the idea of carving, get all your questions answered here before you start buying those tools!
I am sharing here a link to the detailed tutorial written by Pete at diypete.com, who shares the step by step process for making a wonderful barrel coffee table from scratch. He also tells you what items you’ll need for this project and where to find them. For example, you can buy an old whiskey barrel online or from a local whiskey store for a few bucks, if you haven’t already got one.

Description: Spend a weekend with Woodcraft and leave with a traditional Adirondack chair. This course is designed for the entry to intermediate level woodworker who would like to improve their furniture building skills. You will work with both power and hand tools to cut, drill, sand and assemble this classic chair. Instructions, drawings, cypress wood and fasteners are included in the tuition.


This rack can be built from old unused wood pallets you can find around the house. So it is also a great way to recycle those old pallets. You can also find a step by step tutorial at instructables.com for which I have included the source link below. This tutorial helps you to make a wood wine rack from the scratch. So what are waiting for? Just grab the items you need and start building a cool wooden rack for those nice wine bottles of yours.


$1555.00 (Includes all Materials)                        . $500.00 Deposit (Balance due 30 days before class) This is perhaps the most difficult class we offer at our school. This class is not for the faint hearted. This chair will challenge every area of your woodworking skill. We will be dealing with angles, proportion, chair design, choosing wood grain, sculpting of the crest rail using an angle grinder, inlay techniques for the back…
The shelf in the first picture is made of red oak plywood. You can choose the wood type, color and design as you like for your project. In case if you need more help understanding this project, you can refer the source link below. It discusses various items used, steps and tips and personal experience of the author who personally built a Zigzag shelf.
This particular tray is made using reclaimed barn wood but the author of the project Beyond The Picket Fence surprised everyone with one fact: reclaimed barn wood has often some areas turned pink due to cow urine. If you check the project more closely, you’ll also notice some areas of the tray being almost bright pink. That’s something you don’t see every day!
Description: The intent of this class is to learn the basic skills and underlying principles used to construct an end grain board. This can be a cutting board, cheese board, butcher block, etc. The class is in three sessions because there are two overnight glue ups required. Day 1 we will discuss why to construct something end grain; how to prevent cracking; types of wood to use (and not use); required tools and their safe use; how to layout the board; performing the initial preparation of the stock and first glue up. Day 2 consists of cleaning the board up, cutting and arranging it into the desired final pattern, and the second glue up. Day 3 will be the final clean up; trimming; final sanding; edge routing/sanding; a discussion on finishes and how to maintain the board.
With a variety of styles covering every skill-level, the Great Book of Woodworking Projects has something for everyone. Whether you want a challenging project that will beautify your home, such as a stunning Stickley chest of drawers, or you need a quick and easy project for a gift, such as a keepsake box or picture frame, you will find plans that will take a few hours or a weekend to complete.
Cut the 6-1/2-in. x 3-in. lid from the leftover board, and slice the remaining piece into 1/4-in.-thick pieces for the sides and end of the box. Glue them around the plywood floor. Cut a rabbet on three sides of the lid so it fits snugly on the box and drill a 5/8-in. hole for a finger pull. Then just add a finish and you’ve got a beautiful, useful gift. If you don’t have time to make a gift this year, consider offering to do something for the person. You could offer to sharpen their knives! Here’s how.

Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.


Description: If you have ever tried to sharpen a gouge, you know how frustrating it can be. We will show you how to save yourself time, frustration and money, and learn to grind your turning tools right the first time, every time. Brian will demonstrate various ways to sharpen your turning tools such as your skews, gouges and scrapers using different sharpening systems. If time permits, you will be able to sharpen a few of your own tools under his watchful eye.
The mission of the Fine Woodworking Department is to provide our students with opportunities for growth and development that set the foundation for life-long learning, academic achievement, and career accomplishment. We do this through three quality educational programs; traditional woodworking, advanced woodworking technology and lutherie. We encourage a passion for learning, through creativity, a commitment to excellence, and dedication to our students, and the communities we serve.
$1,055.00 (Includes All Materials)         . Deposit $300.00  (Balance due 30 days before class) The secret to fine woodworking can be found in the pursuit of the fundamentals. With high-tech machines and power tools, these fundamentals can be overshadowed. In this class we will learn the values of design, drawings, mock-ups, sharpening, care and use of hand tools, tuning up a bench plane, layout, measuring tools, wood technology, choosing and preparing lumber, joinery (including hand cut dovetails and…
Description: The dovetail joint stands as the symbol of hand tool craftsmanship and for many is regarded as the most challenging test of their skills. Students will learn simple exercises that will give them great confidence with basic hand tools. Ray will provide personal attention and hands-on practice for everyone to learn the layout, sawing, chiseling and assembling of the joint. Both full and half blind dovetails will be covered.
I recently came across this beautiful wooden swing set, which was made in the shape of a boat. Cool, isn’t it? The very first look was enough for me to start loving it. Although I haven’t yet tried building one myself, I am definitely going to. Later I realized that you can also build a baby cradle with the same idea. After all, what can be more calming than the tender rocking of a boat? This swing set will surely help your child get more gentle sleep.

Description: Do you like playing bean bag toss but don't have your own set of boards? Buying a custom set can be expensive. Come take our Bean Bag Toss Game Board Class and we will show you how to make your own set of boards that you can take home and paint however you like. The class will also illustrate how a Kreg Pocket Screw Jig can build a variety of strong joints quickly. Each student will make a set of boards that lock together with storage to hold your bean bags.
Slice, dice and serve in style on this easy, attractive board. We’ll show you a simple way to dry-fit the parts, scribe the arc and then glue the whole thing together. We used a 4-ft. steel ruler to scribe the arcs, but a yardstick or any thin board would also work. Find complete how-to instructions on this woodworking crafts project here. Also, be sure to use water-resistant wood glue and keep your board out of the dishwasher or it might fall apart. And one more thing: Keep the boards as even as possible during glue-up to minimize sanding later. For great tips on gluing wood, check out this collection.
×