Cut the 6-1/2-in. x 3-in. lid from the leftover board, and slice the remaining piece into 1/4-in.-thick pieces for the sides and end of the box. Glue them around the plywood floor. Cut a rabbet on three sides of the lid so it fits snugly on the box and drill a 5/8-in. hole for a finger pull. Then just add a finish and you’ve got a beautiful, useful gift. If you don’t have time to make a gift this year, consider offering to do something for the person. You could offer to sharpen their knives! Here’s how.
We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
Designed for beginners with little to no woodworking experience, this five-session class covers wood physics, shop safety and etiquette, an introduction to joinery concepts, and hands-on experience with the most commonly used woodworking machines. The project for this class is a small side table featuring half-laps, bridle joints, and a round top....

Description: The dovetail joint stands as the symbol of hand tool craftsmanship and for many is regarded as the most challenging test of their skills. Students will learn simple exercises that will give them great confidence with basic hand tools. Ray will provide personal attention and hands-on practice for everyone to learn the layout, sawing, chiseling and assembling of the joint. Both full and half blind dovetails will be covered.


Learn the basics of woodworking with simple hands-on projects to build your confidence and skills. Each lesson in this class explores an area of woodworking that will form the building blocks of all future woodworking projects you undertake. Keeping the average DIY'er in mind, this entire class is conducted using basic handheld power tools, with no fancy fixed tools like table saws, lathes, planers, or drill presses.
You can transfer a graphic on any wood piece of your choice, including a frame, top of a table, etc. The surface should be clean and big enough for the graphic paper. I am also sharing a video tutorial here that explains in detail the process of transferring any graphic to a wooden surface using a freezer paper. Just gather the items you need and follow this video to carve your favorite designs on your favorite wood items.

Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.
Description: One of the first hand held power tools every novice wood worker should have in their arsenal is the router. With an assortment of sharp cutter bits, the router will become one of the most used small power tools in the shop. Although highly versatile, the router can be very intimidating; due to its size and the speed and torque it develops. In the Router 101 class, students will learn how to choose a router, the types of bases used with the router, and the care and feeding (maintenance) of the router. Students will also learn about the categories of router bits, the components used to identify them, what goes into the making of a router bit, and what to look for in making a choice of which bit best meets their needs. So come on out, bring your router and bits if you have them and learn basic routing techniques and tips and tricks to enhance your routing skills.

$50 - $100Alaska Dream HouseBathroomBedroomChildren's and Kid's Room Furniture and Toy PlansCraftroomDesk, Desk Systems and Project Table Plansdining roomentry wayFarmhouse Style Furniture PlansIndustrial Style Furniture PlansKids and Toysliving roomModern Style Furniture PlansNursery and BabyofficeRustic Furniture Plansstorage and organizationTeensIntermediateSide and End Table PlansBuffet, Sideboard and Credenza PlansCabinet PlansNightstands


Our staff of instructors possess a wide variety of skills and interests but an intense passion for the subject they are teaching is common to them all. Whether it is a woodcarving class with Will Neptune, a furniture making class with the school’s director, Bob Van Dyke, or a class on inlay and bandings with Steve Latta, students are assured of thoroughly learning the skills in a relaxed hands-on atmosphere.
Description: This class is designed for beginning woodworkers or those who have been away from their hobby for some time. Students will have a chance to learn about different types of joints using both hand and power tools as they make their own take-home project. The course also covers subjects such as wood technology, selecting and purchasing lumber, sharpening techniques and finishing.
Description: New to the shop environment? Not comfortable around machinery? Spend a day getting to know your way around with one of our experienced instructors. Students will learn the purpose and safe operations of the primary stationary tools such as the tablesaw, jointer, planer, bandsaw and drill press. This hands on class will give you a taste of how these tools take raw material and turn it into finished projects. To the beginner woodworker, this class will pave the way for participation in Woodworking Fundamentals 1.

We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
Description: Ok you've been through Fundamentals Level 1, now let Bret take you one step further with your favorite hobby. During this class you will add to your basic skills by constructing a beautiful Shaker style plant stand. Solid wood table top and tapered legs will be incorporated into this project, teaching you skills needed for furniture making.
Here, I am writing about another DIY project that involves the use of an old furniture piece. I think that the idea of reusing and recycling old furniture has got to me. Anyways, I am starting to love it. This project involves using an old door to build a beautiful multi picture frame, as you can see in the image below. This frame looks really wonderful and can be used to hold many pictures at a time.

As soon as I came across this tutorial, I didn’t wait any longer to start building one. Some of the items you need for this project are hardwood plywood, saw, glue, nails, drilling machine, etc. The video is very easy to follow for anyone with basic woodworking knowledge and experience. The first source link also includes a step by step procedure in plain English for those, who are not comfortable enough with the video tutorial.
We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.

Really nice projects but I wish they didn’t use machines every every single step not everyone has a full commercial shop with huge commercial sized machines that cost thousands of dollars in their house. They need to start focusing on hand tools what what the average person has in their house like table saw and drills and stuff like that not everyone has a massive router table with specialty fence and machine or a commercial band saw or massive commercial table saw or huge joiners and thickness planners. It’s not prectical for most people. The steps are short too like Ok do this whole section on this commercial machine that not average woodworker owns and only someone with a commercial company would even have access to but those people aren’t buying this book because they know how to do these things already they don’t need a book telling them how to do what the legit do as a career. The people buying this book are normal people trying to do this as a hobby for fun at home. So cater to them don’t take a short cut because it’s easy for you to tell someone to do something you can do in two seconds but those people have to somehow figure out how to do this one their own in a way not shown in the book because they don’t have the machines you do. It’s Being lazy and writing a book that’s almost completely useless to someone trying to make these projects. But if I did own all these machines and has all that space and money and materials it’s a good book.
$875.00 (Includes all Materials)          . $300.00 Deposit (Balance due 30 days before class) Good joinery is key to making fine furniture that will last for generations. Many of us are intimidated by the complexity of these joints. In this class we hope to de-mystify and simplify the joinery process. We will learn western and eastern joinery and their applications, including dovetails, half-blind dovetails, sliding dovetails, mortise-and-tenons, angled mortise-and-tenons, lap joints, bridle joints, miter joints, scarf joints,…
$360.00 (Includes all Materials except the Plane) $100.00 Deposit (Balance due 30 days before class) In this two day class we will reveal some of the secrets to tuning up a Japanese Hand Plane (Kanna) We will start with conditioning the Body of the Plane (DAI) to stabilize movement. Proper sharpening and grinding of the blade and chip breaker will be discussed and demonstrated. Custom fitting the blade to the Dai and conditioning the sole. We will also demystified the…
Description: Do you and your significant other want to learn basic wood working skills and have fun creating a one of a kind project together? We will provide the food, soft drinks, and materials. You only need to show up and be ready to make some saw dust. Projects will vary from month to month and will consist of small projects such as pens, bottle stoppers/openers, pepper grinders, etc.
Really nice projects but I wish they didn’t use machines every every single step not everyone has a full commercial shop with huge commercial sized machines that cost thousands of dollars in their house. They need to start focusing on hand tools what what the average person has in their house like table saw and drills and stuff like that not everyone has a massive router table with specialty fence and machine or a commercial band saw or massive commercial table saw or huge joiners and thickness planners. It’s not prectical for most people. The steps are short too like Ok do this whole section on this commercial machine that not average woodworker owns and only someone with a commercial company would even have access to but those people aren’t buying this book because they know how to do these things already they don’t need a book telling them how to do what the legit do as a career. The people buying this book are normal people trying to do this as a hobby for fun at home. So cater to them don’t take a short cut because it’s easy for you to tell someone to do something you can do in two seconds but those people have to somehow figure out how to do this one their own in a way not shown in the book because they don’t have the machines you do. It’s Being lazy and writing a book that’s almost completely useless to someone trying to make these projects. But if I did own all these machines and has all that space and money and materials it’s a good book.
Looking to jump right into the world of fine woodworking? Is your goal is to continue creating projects long after attending one of our workshops? Then Introduction to Furniture Making is for you! Throughout this 16 hour intensive workshop (split over 4 or 6 sessions), students will build a solid foundation for their new venture into woodworking....
Description: This class is intended to teach safe knife making to woodworkers of any skill level. Starting with a knife blank, you will learn how to select, prepare and fasten the handle material. Then you will learn how to shape, polish and finish the handle and the metal. Advanced techniques such as folding knives and compound handles may also be taught depending on time. Each student should go home with a completed knife. STUDENT PROVIDES/BUYS KNIFE KIT AND SCALES.

Build your own platform bed frame at your home by following the source linked tutorial given above. The source link also includes more pictures that can help you to build a better bed frame. You can see a step by step set of instructions and guidelines to follow with real life pictures, as well as you can download a PDF file detailing the list of materials and tools you’ll need, know about the length of every board, and most importantly color-coded illustrations of the building process.
×