Description: The intent of this class is to learn the basic skills and underlying principles used to construct an end grain board. This can be a cutting board, cheese board, butcher block, etc. The class is in three sessions because there are two overnight glue ups required. Day 1 we will discuss why to construct something end grain; how to prevent cracking; types of wood to use (and not use); required tools and their safe use; how to layout the board; performing the initial preparation of the stock and first glue up. Day 2 consists of cleaning the board up, cutting and arranging it into the desired final pattern, and the second glue up. Day 3 will be the final clean up; trimming; final sanding; edge routing/sanding; a discussion on finishes and how to maintain the board.
Description: A sharp tool is a turner's best friend. If you are having difficulty achieving smooth cuts and relying on scraping rather than cutting then this is the class for you. In this class you will learn a quick and easy way to repeatedly and consistently sharpen all of your wood turning tools using the Wolverine sharpening system on a slow speed grinder. The Varigrind jig will be demystified and you will be show a simple method to sharpen all of your bowl and spindle gouges. Sharpening the spindle roughing gouge, skew, and scraper will also be discussed and demonstrated. Bring your turning tools - as many as you want to sharpen to practice your skills in class.
Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
The space behind a door is a storage spot that’s often overlooked. Build a set of shallow shelves and mount it to the wall behind your laundry room door. The materials are inexpensive. Measure the distance between the door hinge and the wall and subtract an inch. This is the maximum depth of the shelves. We used 1x4s for the sides, top and shelves. Screw the sides to the top. Then screw three 1×2 hanging strips to the sides: one top and bottom and one centered. Nail metal shelf standards to the sides. Complete the shelves by nailing a 1×2 trim piece to the sides and top. The 1×2 dresses up the shelf unit and keeps the shelves from falling off the shelf clips.
Description: Do you and your significant other want to learn basic wood working skills and have fun creating a one of a kind project together? We will provide the food, soft drinks, and materials. You only need to show up and be ready to make some saw dust. Projects will vary from month to month and will consist of small projects such as pens, bottle stoppers/openers, pepper grinders, etc.
Description: Have you ever gone to one of those expensive framing shops and been taken back by the cost of a picture frame? Here is the opportunity to learn how to make your own frames and save money. The Picture Framing class will show you the basics for measuring and making your own picture frames. You will be shown how to use woodworking joinery that can be incorporated in your framing projects which are not only functional, but decorative as well. You will use the jointer and table saw to square stock, the table saw and the electric miter saw to cut mitered corners, and the router table to create assorted decorative profiles for your frames. Students will make the components for an 8" X 10" picture frame.
Whether you're new to woodworking or you've been doing it for years, Woodcraft's selection of woodworking projects is one the best places to find your next big project. Whether you're looking to make wooden furniture, pens, toys, jewelry boxes, or any other project in between, the avid woodworker is sure to find his or her next masterpiece here. Find hundreds of detailed woodworking plans with highly accurate illustrations, instructions, and dimensions. Be sure to check out our Make Something blog to learn expert insights and inspiration for your next woodworking project.