Description: Spend a weekend with Woodcraft and leave with a traditional Adirondack chair. This course is designed for the entry to intermediate level woodworker who would like to improve their furniture building skills. You will work with both power and hand tools to cut, drill, sand and assemble this classic chair. Instructions, drawings, cypress wood and fasteners are included in the tuition.
Description: This is a more in depth class about bench planes than above. In this class, let period furniture maker Ray Journigan show you how to make using a bench plane your new favorite go to tool. Lean what makes one plane better than another? Then Ray demonstrates the steps of flattening a wide board using hand planes followed by each student having the opportunity to surface a board to "finish ready" without any sanding using their hand planes. In this class we take the plane apart and explain all the adjustments to properly tune up your hand plane. Then block planes are discussed showing their importance in furniture work. Next, for those REALLY interested in learning how different types of handplanes were used, Ray will show and demonstrate the use of specialty planes such as Rabbit planes, Shoulder planes, Dado planes, Dovetail planes, Scraper planes, and molding planes. Lastly we turn our attention to sharpening to a razor edge. Student leave with an eye opening experience having learned thru practice, the joy and ease of using hand planes.
To corral shelf-dwelling books or DVDs that like to wander, cut 3/4-in.-thick hardwood pieces into 6-in. x 6-in. squares. Use a band saw or jigsaw to cut a slot along one edge (with the grain) that’s a smidgen wider than the shelf thickness. Stop the notch 3/4 in. from the other edge. Finish the bookend and slide it on the shelf. Want to build the shelves, too? We’ve got complete plans for great-looking shelves here.

Free next Tuesday evening? The Minneapolis store is offering a class on panel door construction August 1, from 5:00 to 9:00 pm.  You'll learn everything you need to know about this fundamental cabinetmaker's skill to make standard and arched top raised panel doors. August 5 at the Denver store, Cindy Drozda will offer instruction in the techniques she uses to produce her signature style lidded containers (see "Yemaya," above).  This is a great opportunity to learn from a master wood turner who has elevated the craft to the level of fine art.  Students will work on their own projects and most will take home a completed container. Also on August 5, the Phoenix store is offering an advanced turning class.  If you are an intermediate-level wood turner, this would be an excellent opportunity to sharpen your skills and learn techniques that go beyond the basics.
Wall-mounted or placed on a table or countertop, this handsome display cabinet is the perfect way to share any collection while keeping it clean and protected at the same time. Featuring tempered glass doors and three shelves, the cabinet’s design calls for all straight cuts and straightforward construction techniques (simple cut-outs give the effect of
This was not actually a tutorial post to the woodworking plan ideas but the aim of the post was to give some easy and free woodworking ideas to the readers. If you have some time to entertain yourself and also willing to add some new stuff to your furniture you can take any idea from the list and start working on it. Be sure to see both post tutorial and video tutorials of the plan you have selected, it will make you understand everything nicely.
Description: Come explore the world of chip carving! Geometric and free form designs created with a cutting knife and stab knife provide tremendous opportunities for artistic expression based on generations of tradition. This hands-on class will cover carving techniques, traditional as well as free form designs, layout and knife sharpening methods. Tools required: Chip carving cutting knife and stab knife, mechanical pencil with .5mm lead, eraser, T-square, and draftsman's compass. Recommended reading: The Complete Guide to Chip Carving by Wayne Barton.
$995.00 (Includes all Materials)                                     . $300.00 Deposit (Balance due 30 days before class)     . This Stool was designed by Sam Maloof in 1950's. Sam could often be found sitting on a walnut leather laced stool, talking on the phone in his kitchen. We made several of these stools over the years. Now is your chance to create one of these historic iconic…
Description: This class is intended to teach safe knife making to woodworkers of any skill level. Starting with a knife blank, you will learn how to select, prepare and fasten the handle material. Then you will learn how to shape, polish and finish the handle and the metal. Advanced techniques such as folding knives and compound handles may also be taught depending on time. Each student should go home with a completed knife. STUDENT PROVIDES/BUYS KNIFE KIT AND SCALES.
Description: In this class period furniture maker Ray Journigan will show you why there were so many different types of planes and what each one was used for. Through demonstrations, he will show you why the most expensive plane is NOT necessary to get a perfect surface. Watch his procedure of making rough lumber turn into glass smooth, finish ready surfaces in just minutes, no sanding necessary! Ever wonder what to look for in a flea marker plane? How to sharpen it for razor thin shavings? How to set it up properly? What makes one plane better than another? Come see why every shop needs a good hand plane no matter what style furniture you make. If you are thinking about incorporating hand tools into your work, take this class before you buy your first hand plane.
Here, I am writing about another DIY project that involves the use of an old furniture piece. I think that the idea of reusing and recycling old furniture has got to me. Anyways, I am starting to love it. This project involves using an old door to build a beautiful multi picture frame, as you can see in the image below. This frame looks really wonderful and can be used to hold many pictures at a time.
Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
Isn’t this amazing that instead of having to throw that old furniture piece away, you can now reuse it to build something even more beautiful? If you do not like this particular idea, there are many other re-purposeful furniture items you can build from an old dresser. Just search the internet for other DIY project ideas. Here is a link to the video tutorial that explains the same procedure in a more practical manner that you can easily follow through.

$1250.00 (Includes all Materials)            . $300.00 Deposit (Balance due 30 days before class) In this class not only will we build this beautiful coffee table inspired by Greene and Greene, Stickley and a little bit of Krenov, but we will learn many table construction techniques. Reading wood grain, Mortise & tenon, shaping wood, bread board ends, drawer construction, fitting the drawer, as well as many of the Greene and Greene details such as square ebony…


In this 5-day intensive you'll get hands-on training with essential hand tools--back saws, chisels, and planes--while making a classic hardwood mallet with simple and elegant joinery. You'll also learn how to keep your tools sharp and well-tuned. This class provides a solid foundation of skills and techniques for both small projects and more advanced...
Description: This class is intended to teach safe knife making to woodworkers of any skill level. Starting with a knife blank, you will learn how to select, prepare and fasten the handle material. Then you will learn how to shape, polish and finish the handle and the metal. Advanced techniques such as folding knives and compound handles may also be taught depending on time. Each student should go home with a completed knife. STUDENT PROVIDES/BUYS KNIFE KIT AND SCALES.
Free next Tuesday evening? The Minneapolis store is offering a class on panel door construction August 1, from 5:00 to 9:00 pm.  You'll learn everything you need to know about this fundamental cabinetmaker's skill to make standard and arched top raised panel doors. August 5 at the Denver store, Cindy Drozda will offer instruction in the techniques she uses to produce her signature style lidded containers (see "Yemaya," above).  This is a great opportunity to learn from a master wood turner who has elevated the craft to the level of fine art.  Students will work on their own projects and most will take home a completed container. Also on August 5, the Phoenix store is offering an advanced turning class.  If you are an intermediate-level wood turner, this would be an excellent opportunity to sharpen your skills and learn techniques that go beyond the basics.
The use of hand tools is often the favorite part of a woodworkers project; hand tools are quiet and demand a level of concentration that makes one forget about everything else. Immerse yourself in this one-day hand tools intensive taught by master craftsman Glen Guarino of Guarino Furniture Designs. Students will start out with a block of wood from...
Description: Do you and your significant other want to le3arn basic wood working skills and have fun creating a one of a kind project together? We will provide the food, soft drinks, and materials. You only need to show up and be ready to make some saw dust. Projects will vary from month to month and will consist of small projects such as pens, bottle stoppers/openers, pepper grinders, etc.
Finding a toolbox for a mechanic, for his hand tools, is not a big challenge at all - there are dozens of the tool boxes available on the market, from huge roll-around shop cases to small metal boxes. Plumbers, electricians, and farmers are well served, too, with everything from pickup-truck storage to toolboxes and belts. But, if you are a shop-bound woodworker then the case changes. You get to need a tool box that suits the range and variety of hand tools that most woodworkers like to have. For those who deny making do with second best, there's only one solution, you’ve to build a wooden toolbox that should be designed expressly for a woodworking shop.
×