$995.00 (Includes all Materials)                                     . $300.00 Deposit (Balance due 30 days before class)     . This Stool was designed by Sam Maloof in 1950's. Sam could often be found sitting on a walnut leather laced stool, talking on the phone in his kitchen. We made several of these stools over the years. Now is your chance to create one of these historic iconic…

There’s a lot of space above the shelf in most closets. Even though it’s a little hard to reach, it’s a great place to store seldom-used items. Make use of this wasted space by adding a second shelf above the existing one. Buy enough closet shelving material to match the length of the existing shelf plus enough for two end supports and middle supports over each bracket. Twelve-inch-wide shelving is available in various lengths and finishes at home centers and lumberyards.


Description: Normally we use the lathe to turn perfectly round spindles or vessels "on axis". By changing the axis of rotation during a turning project, very interesting and unusual shapes develop. During this class students will learn the basic concepts that make this style of turning so unique. This knowledge can then be incorporated into your future spindle and face plate projects.
$875.00 (Includes all Materials)          . $300.00 Deposit (Balance due 30 days before class) Good joinery is key to making fine furniture that will last for generations. Many of us are intimidated by the complexity of these joints. In this class we hope to de-mystify and simplify the joinery process. We will learn western and eastern joinery and their applications, including dovetails, half-blind dovetails, sliding dovetails, mortise-and-tenons, angled mortise-and-tenons, lap joints, bridle joints, miter joints, scarf joints,…
Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
Can you believe that this amazing wine rack the image below has been built using old wood pallets? Perhaps you can. Isn’t it wonderful that your old wood pallets can be reused to build something so beautiful and useful? I am not a drinker but I liked the idea so much that I just couldn’t resist making myself one. Although later I gifted it to my parents, who totally loved it.
Description: This class is the next step in fine woodworking and furniture making. This elegant keepsake box features period furniture details and will improve any woodworker's skill level. In this two-day class you will learn dovetail joinery, building a bracket foot, routing decorative moldings and how to applying moldings to compensate for wood movement. This box design can easily be scaled up to create a jewelry box with multiple trays and/or drawers and even larger to build a blanket chest. During the process of building the Keepsake Box, the student will learn about the fundamentals of design and layout, the approach to building a multi-component furniture piece and the safe use of shop tools such as a router, drill press, jointer, planer and tablesaw.
Really nice projects but I wish they didn’t use machines every every single step not everyone has a full commercial shop with huge commercial sized machines that cost thousands of dollars in their house. They need to start focusing on hand tools what what the average person has in their house like table saw and drills and stuff like that not everyone has a massive router table with specialty fence and machine or a commercial band saw or massive commercial table saw or huge joiners and thickness planners. It’s not prectical for most people. The steps are short too like Ok do this whole section on this commercial machine that not average woodworker owns and only someone with a commercial company would even have access to but those people aren’t buying this book because they know how to do these things already they don’t need a book telling them how to do what the legit do as a career. The people buying this book are normal people trying to do this as a hobby for fun at home. So cater to them don’t take a short cut because it’s easy for you to tell someone to do something you can do in two seconds but those people have to somehow figure out how to do this one their own in a way not shown in the book because they don’t have the machines you do. It’s Being lazy and writing a book that’s almost completely useless to someone trying to make these projects. But if I did own all these machines and has all that space and money and materials it’s a good book.

Drill four 5/8-in.-dia. 1/2-in.-deep holes on the large disc?inside the traced circle?then use 5/8-in. dowel centers to transfer the hole locations to the underside of the small disc. Drill four 1/2-in.-deep holes on the underside of the small disc and a 1/2-in.-deep hole in the center of the top for the dowel handle. Glue in the dowels to join the discs, and glue in the handle. We drilled a wood ball for a handle knob, but a screw-on ceramic knob also provides a comfortable, attractive grip.


Description: The bandsaw is one of your most versatile power tools, and this class will show you how to safely get the most out of it. Steve will show you how to set up your bandsaw for consistent accuracy and teach you proper blade selection. Learn how to perform straight cuts, curves, and how to rough saw cabriole lets. You'll also learn the secrets of resawing: a technique that can save you money and add uniqueness to your projects
Description: A sharp tool is a turner's best friend. If you are having difficulty achieving smooth cuts and relying on scraping rather than cutting then this is the class for you. In this class you will learn a quick and easy way to repeatedly and consistently sharpen all of your wood turning tools using the Wolverine sharpening system on a slow speed grinder. The Varigrind jig will be demystified and you will be show a simple method to sharpen all of your bowl and spindle gouges. Sharpening the spindle roughing gouge, skew, and scraper will also be discussed and demonstrated. Bring your turning tools - as many as you want to sharpen to practice your skills in class.

You can transfer a graphic on any wood piece of your choice, including a frame, top of a table, etc. The surface should be clean and big enough for the graphic paper. I am also sharing a video tutorial here that explains in detail the process of transferring any graphic to a wooden surface using a freezer paper. Just gather the items you need and follow this video to carve your favorite designs on your favorite wood items.
Description: Have you ever gone to one of those expensive framing shops and been taken back by the cost of a picture frame? Here is the opportunity to learn how to make your own frames and save money. The Picture Framing class will show you the basics for measuring and making your own picture frames. You will be shown how to use woodworking joinery that can be incorporated in your framing projects which are not only functional, but decorative as well. You will use the jointer and table saw to square stock, the table saw and the electric miter saw to cut mitered corners, and the router table to create assorted decorative profiles for your frames. Students will make the components for an 8" X 10" picture frame.
​The plan tutorial includes images, diagrams, step-by-step instructions, and even a video to help you along the way. You can also go with some more bookcase design ideas. Browse the internet for more and we are also proving a link below to some more ideas to this plan. Select and build one of these free bookcase DIYs and you will have everything available easily that you need to get started creating a bookshelf for any room in your house.
An ideal resource for woodworkers looking for a new project or wanting to spruce up their home! From kitchen improvements and storage solutions to classic furniture in the Craftsman and Adirondack styles, the experts at American Woodworker have provided plans and instructions for building 50 great-looking projects that will improve every space inside and outside your home.
Description: Through relief carving, a common piece of flat wood is transformed into your own woodcarving creation. In this class you will learn basic relief carving techniques such as stop cuts, undercutting, and depth and shadows. The application of the skills is universal and can be used in sign making, decorating furniture, picture frames, standalone creations, and more.
Description: In this class, Ray explains through demonstration the proper use, the making of all the joints used in 18th century furniture construction. The different types of dovetails, mortise and tenons, bridle joints, and others. While machine alternative methods will be discussed our focus will be on the use of hand tools to cut each joint. After watching the procedure demonstrated each student will be coached through their first attempt at each joint using their own hand tools. Learn how to properly and accurately layout and cut the perfect fitting joint! The best part is that these methods can be used on any style of furniture you wish to make ensuring they will last well over 200 years!
Building a bookcase or bookshelf is a fairly simple woodworking plan that you can get done in just a day or two. This is also a low-cost project as well and since the project idea is free, you don't have to worry about busting through your budget. Just follow the simple steps in the tutorial and enjoy your own company building a simple bookcase on this weekend.

Description: Come explore the world of chip carving! Geometric and free form designs created with a cutting knife and stab knife provide tremendous opportunities for artistic expression based on generations of tradition. This hands-on class will cover carving techniques, traditional as well as free form designs, layout and knife sharpening methods. Tools required: Chip carving cutting knife and stab knife, mechanical pencil with .5mm lead, eraser, T-square, and draftsman's compass. Recommended reading: The Complete Guide to Chip Carving by Wayne Barton.
Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.
Description: In this workshop, period furniture maker Ray Journigan will explain what you will need to start adding carvings to you furniture. It all starts with the proper set up at the workbench. Ray explains the importance of good lighting. Watch Ray as he carves a scalloped shell to show the different body and hand Ray will also explain what is needed to keep those tools razor sharp. Face it, carving tools are expensive. Ray explains what makes a good carving chisel and which tools makes a good starter set. If you are new to the idea of carving, get all your questions answered here before you start buying those tools!
With a variety of styles covering every skill-level, the Great Book of Woodworking Projects has something for everyone. Whether you want a challenging project that will beautify your home, such as a stunning Stickley chest of drawers, or you need a quick and easy project for a gift, such as a keepsake box or picture frame, you will find plans that will take a few hours or a weekend to complete.
Can you believe that this amazing wine rack the image below has been built using old wood pallets? Perhaps you can. Isn’t it wonderful that your old wood pallets can be reused to build something so beautiful and useful? I am not a drinker but I liked the idea so much that I just couldn’t resist making myself one. Although later I gifted it to my parents, who totally loved it.
As you can see in the image, this shelf goes on both sides of the corner wall. It looks beautiful and can be used to organize books, trophies, pictures frames and many other things. The strength and design of the shelf depends on how properly you build it. First time workers definitely need some guidance to help them with the process. Therefore, I am including this basic video that I found on YouTube that demonstrates the process of making corner wall wooden shelves.
Description: Using the skew is a challenge for many turners. This class will demystify the skew and show you how to avoid the dreaded run back. Proper sharpening and cutting geometry will be demonstrated and students will learn several basic skew cuts - roughing, peeling, planing, bead and cove cuts with the skew. The student will complete the class by turning a small tool handle with just the skew.

Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
Description: This class is intended to teach safe knife making to woodworkers of any skill level. Starting with a knife blank, you will learn how to select, prepare and fasten the handle material. Then you will learn how to shape, polish and finish the handle and the metal. Advanced techniques such as folding knives and compound handles may also be taught depending on time. Each student should go home with a completed knife. STUDENT PROVIDES/BUYS KNIFE KIT AND SCALES.
Description: Do you and your significant other want to le3arn basic wood working skills and have fun creating a one of a kind project together? We will provide the food, soft drinks, and materials. You only need to show up and be ready to make some saw dust. Projects will vary from month to month and will consist of small projects such as pens, bottle stoppers/openers, pepper grinders, etc.
Building a wine rack is usually a very common beginner's woodworking plan. Creating a wine rack is an easy plan that can most of the time be completed in a day or half, depending on how large and detailed you would like it to be. And the better news is that this free wine rack plan will let you build you a great looking wine rack for much less than it would cost.
×