$995.00 (Includes all Materials)                                     . $300.00 Deposit (Balance due 30 days before class)     . This Stool was designed by Sam Maloof in 1950's. Sam could often be found sitting on a walnut leather laced stool, talking on the phone in his kitchen. We made several of these stools over the years. Now is your chance to create one of these historic iconic…
Description: Do you and your significant other want to le3arn basic wood working skills and have fun creating a one of a kind project together? We will provide the food, soft drinks, and materials. You only need to show up and be ready to make some saw dust. Projects will vary from month to month and will consist of small projects such as pens, bottle stoppers/openers, pepper grinders, etc.
Learn the basics of woodworking with simple hands-on projects to build your confidence and skills. Each lesson in this class explores an area of woodworking that will form the building blocks of all future woodworking projects you undertake. Keeping the average DIY'er in mind, this entire class is conducted using basic handheld power tools, with no fancy fixed tools like table saws, lathes, planers, or drill presses.
Here, I am writing about another DIY project that involves the use of an old furniture piece. I think that the idea of reusing and recycling old furniture has got to me. Anyways, I am starting to love it. This project involves using an old door to build a beautiful multi picture frame, as you can see in the image below. This frame looks really wonderful and can be used to hold many pictures at a time.
Wall-mounted or placed on a table or countertop, this handsome display cabinet is the perfect way to share any collection while keeping it clean and protected at the same time. Featuring tempered glass doors and three shelves, the cabinet’s design calls for all straight cuts and straightforward construction techniques (simple cut-outs give the effect of

$1250.00 (Includes all Materials)                            . $300.00 Deposit (Balance due 30 days before class) In this class, we will cover different methods and techniques for cabinet construction. These methods can be applied to building kitchens, vanities, entertainment unit, build-in, home theaters or just a stand alone cabinet. We will build a cabinet using face frame, finish ends with frame and panel. We will cover topics such as door…


The space behind a door is a storage spot that’s often overlooked. Build a set of shallow shelves and mount it to the wall behind your laundry room door. The materials are inexpensive. Measure the distance between the door hinge and the wall and subtract an inch. This is the maximum depth of the shelves. We used 1x4s for the sides, top and shelves. Screw the sides to the top. Then screw three 1×2 hanging strips to the sides: one top and bottom and one centered. Nail metal shelf standards to the sides. Complete the shelves by nailing a 1×2 trim piece to the sides and top. The 1×2 dresses up the shelf unit and keeps the shelves from falling off the shelf clips.

Description: If you have ever tried to sharpen a gouge, you know how frustrating it can be. We will show you how to save yourself time, frustration and money, and learn to grind your turning tools right the first time, every time. Brian will demonstrate various ways to sharpen your turning tools such as your skews, gouges and scrapers using different sharpening systems. If time permits, you will be able to sharpen a few of your own tools under his watchful eye.
Description: This class is intended to teach safe knife making to woodworkers of any skill level. Starting with a knife blank, you will learn how to select, prepare and fasten the handle material. Then you will learn how to shape, polish and finish the handle and the metal. Advanced techniques such as folding knives and compound handles may also be taught depending on time. Each student should go home with a completed knife. STUDENT PROVIDES/BUYS KNIFE KIT AND SCALES.
Description: Using the skew is a challenge for many turners. This class will demystify the skew and show you how to avoid the dreaded run back. Proper sharpening and cutting geometry will be demonstrated and students will learn several basic skew cuts - roughing, peeling, planing, bead and cove cuts with the skew. The student will complete the class by turning a small tool handle with just the skew.

Description: In this class you will learn, through demonstrations and exercises, the fundamentals of carving that will provide a solid foundation for all types of carving. Learn about carving materials and tools, how to sharpen and get the most out of each tool, how to read and carve in relation to wood grain, how to set up a work station, and about different styles of carving. Together we'll execute, beads, rosettes, volutes, "C" scroll, and more. You'll leave with the understanding and confidence to grow and explore with this new found skill!
Cut the 6-1/2-in. x 3-in. lid from the leftover board, and slice the remaining piece into 1/4-in.-thick pieces for the sides and end of the box. Glue them around the plywood floor. Cut a rabbet on three sides of the lid so it fits snugly on the box and drill a 5/8-in. hole for a finger pull. Then just add a finish and you’ve got a beautiful, useful gift. If you don’t have time to make a gift this year, consider offering to do something for the person. You could offer to sharpen their knives! Here’s how.
The beauty of this project lies in the simplicity. All you need are 3 pieces of wood of your choice (though we must admit natural hardwoods will look incredible), sanding block, clamps, wood glue and finishing product. The hardest step of the whole tutorial is measuring – as always, measure 9 times, cut once! You wouldn’t want to finish your project and then realize it doesn’t have enough space to fit your DVD player, would you?
This corner stone joint of western woodwork has also been used in the Japanese tradition for a long time. Class we will cover: sizing, proportioning, choice of angle, layout and cutting as well as where to use dovetails. You will see examples of full, half blind and blind dovetails. There will be a full cutting and assembly demonstration as well...
Description: Spend a weekend with Woodcraft and leave with a traditional Adirondack chair. This course is designed for the entry to intermediate level woodworker who would like to improve their furniture building skills. You will work with both power and hand tools to cut, drill, sand and assemble this classic chair. Instructions, drawings, cypress wood and fasteners are included in the tuition.
We have a small dining room area in our farmhouse that is separate from the living room and kitchen. The area is much smaller in space than our last house. I was little confused that our typical rectangular farmhouse table was not going to cut it. So, I walked in I came to know that we needed to build a round dining table. So, I searched for a plan design idea and build a very own round farmhouse dining table. I was an amazing DIY plan, I just love it!
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
Designed for beginners with little to no woodworking experience, this five-session class covers wood physics, shop safety and etiquette, an introduction to joinery concepts, and hands-on experience with the most commonly used woodworking machines. The project for this class is a small side table featuring half-laps, bridle joints, and a round top....
$1555.00 (Includes all Materials)                        . $500.00 Deposit (Balance due 30 days before class) This is perhaps the most difficult class we offer at our school. This class is not for the faint hearted. This chair will challenge every area of your woodworking skill. We will be dealing with angles, proportion, chair design, choosing wood grain, sculpting of the crest rail using an angle grinder, inlay techniques for the back…
Description: Ok you've been through Fundamentals Level 1, now let Bret take you one step further with your favorite hobby. During this class you will add to your basic skills by constructing a beautiful Shaker style plant stand. Solid wood table top and tapered legs will be incorporated into this project, teaching you skills needed for furniture making.
Description: You're not finished until it's finished and this course help add the perfect touch to complete your project. You'll learn the concepts behind finishing, how to prepare your surface, how staining and dye work, and several basic finishes. You will practice the specific skills you need to apply a general purpose finish to your prized projects.
Description: New to woodworking or looking to refresh your skills? What to see how someone else would do it? We have different Fundamentals classes where instructors teach you the skills to safely and properly use equipment, tools and jigs. In all classes you will learn about taking rough wood into a finished piece using the planer, jointer, mitersaw and tablesaw. In this class you will make a unique Shaker inspired step stool with a back/handle. Along with the tools listed above you will also use Porter Cable's box joint jig, router table, and a mortiser.
Description: The bandsaw is one of your most versatile power tools, and this class will show you how to safely get the most out of it. Steve will show you how to set up your bandsaw for consistent accuracy and teach you proper blade selection. Learn how to perform straight cuts, curves, and how to rough saw cabriole lets. You'll also learn the secrets of resawing: a technique that can save you money and add uniqueness to your projects
$1250.00 (Includes All Materials)          . $300.00 Deposit (Balance due 30 days before class) This six day sculpted chair class will definitely broaden and raise your woodworking skills a few notches. The class will cover topics such as chair joinery, design, placement of back spindle for comfort, defining hard and soft lines, sculpting using various methods such as grinder, rasps, gouges, scrapers and spoke shaves. Cherry wood will be prepared for you before you arrive to save…
Description: Learn the art of decorating wood with burning from craftsmen, Jim Vogel. Jim will introduce you the basic skills you will need to know to enjoy the art of Pyrography. Students will learn about the control unit, temperature control, pen and tip selection, and the care and maintenance of the tool and tips. You will also learn to select wood, patterns, and how to transfer patterns to wood. Students will make a practice board and learn the various textures and lines they can create with the basic pens/tips. You will start a small project to complete at home. Woodburning unit and tips will be provided.
Free next Tuesday evening? The Minneapolis store is offering a class on panel door construction August 1, from 5:00 to 9:00 pm.  You'll learn everything you need to know about this fundamental cabinetmaker's skill to make standard and arched top raised panel doors. August 5 at the Denver store, Cindy Drozda will offer instruction in the techniques she uses to produce her signature style lidded containers (see "Yemaya," above).  This is a great opportunity to learn from a master wood turner who has elevated the craft to the level of fine art.  Students will work on their own projects and most will take home a completed container. Also on August 5, the Phoenix store is offering an advanced turning class.  If you are an intermediate-level wood turner, this would be an excellent opportunity to sharpen your skills and learn techniques that go beyond the basics.

The best thing about this wine rack is that it is very easy to build. All you need is the basic understanding of woodworking and a few tools to get started. You can modify your wine rack any way you want or build in a design or color different from this one. The basic steps to build a wooden wine rack are the same for all variants. I have included here the video tutorial that I followed in order to build myself a pallet wide rack.


The video explains the step by step process of making a nice wooden phone stand from scratch. My first wooden holder was not the best one, but it was good enough to motivate me to make more. I now possess 10 mobile wooden stands in different shapes and styles. And if I can make this, you too can make one yourself. Search the internet for more mobile holder ideas and start making one now.
And the fact is that you can make your own patio chair with several old but still good pallets. Here we are providing a tutorial that everybody can follow easily – it is very well-written and also self-explanatory, which is great for those who are a beginner at woodworking and have never completed a DIY project before. As you don’t need to be a professional woodworker or a handyman to complete this project, so it is not a difficult task – all you need is a bit of determination!​
×