As soon as I came across this tutorial, I didn’t wait any longer to start building one. Some of the items you need for this project are hardwood plywood, saw, glue, nails, drilling machine, etc. The video is very easy to follow for anyone with basic woodworking knowledge and experience. The first source link also includes a step by step procedure in plain English for those, who are not comfortable enough with the video tutorial.

I got this idea from a Pinterest post. The final product looks so beautiful that I just couldn’t wait to make one for myself. This was somewhat a different experience from my other regular DIY projects as it doesn’t involve making something from scratch, but turning an existing wood piece into another one. Nonetheless, I enjoyed it very much and the final product was very satisfying. The tutorial I used is linked below.


Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
Description: In this two day carving class the student will learn about the different styles of and how ball & claw feet were used on furniture of the 18th century. Come let Master carver and 2018 "Cartouche" winner Ray Journigan guide each student, even those will little carving experience, through the successful execution of carving a Philadelphia style Ball & Claw foot. Methods of layout, clamping, and tool sharpening will also be covered.
A bottle carrier is a bucket like carrier used to carry beer bottles and so. Yes, the same one you must have used to carry your six-pack. Drinker or not, a bottle carrier is a useful item for everyone. It can be used to carry around or store small items around a household. And it is also very easy to build one. I have several of these lying around my house. Also known as wooden beer totes, this is one wood item you will absolutely love to make. It is also super easy to build.

A super simple iPad Dock/stand made out of a single block of wood features an angled groove which gets to support the tablet device and a cut in a hole to revise access to the home button of your iPad. It’s possible to drill an access channel in the stand through which you can run a charging cable, although this mini stripped back iPad stand may have very limited functions.
A super simple iPad Dock/stand made out of a single block of wood features an angled groove which gets to support the tablet device and a cut in a hole to revise access to the home button of your iPad. It’s possible to drill an access channel in the stand through which you can run a charging cable, although this mini stripped back iPad stand may have very limited functions.
Description: A foot stool is a great way to gain skills with hand tools. This useful piece of furniture can be used to rest the feet after a long day or as a sitting stool for that last arriving guest. In this class, after mastering mortise and tenons by hand, Ray will show you how to layout, cut, and shape Queen Anne cabriole legs without the need of a lathe. You may choose to carve ball & claw feet if you have already taken that class! Then, using rasp, spokeshaves, and scrapers, he will show you how to refine the curved shapes. For the more ambitious, Ray will demonstrate carving the applied scalloped shells that can be applied to the aprons and also how to execute the shell on the knees carved in the solid. You don't want to miss this one! It will take your woodworking to the next level! Now you will be ready to tackle the upcoming Queen Anne Side Chair! Tool List: You are encouraged to bring your general woodworking tools along with the following: For the Stool: 5/16" Mortise Chisel 1⁄4", 1⁄2", 3⁄4", 1" bench Chisels (If you have them) Mallet 6" or larger Rule Combination Square Tenon or Dovetail saw #49 or 50 Nicholson rasp or equalivant 10" Med cut cabinet file 8" Smooth cut wood file Spokeshave Square card scraper Smooth plane Block Plane Shoulder Plane Compass Carving parts: (optional): You are encouraged to bring your carving roll with chisels to include the following: 15/6mm v tool 7/14mm gouge (fishtail if purchasing) 2/12mm gouge 8/3mm gouge 2/30mm gouge 8/7mm gouge 5/8mm gouge (fishtail if purchasing) 8/10mm gouge 5/12mm gouge (fishtail if purchasing) 8/13mm gouge 5/25mm gouge 25/10mm Backbend gouge 7/6mm gouge (fishtail if purchasing) 7/10mm gouge (fishtail if purchasing)
Really nice projects but I wish they didn’t use machines every every single step not everyone has a full commercial shop with huge commercial sized machines that cost thousands of dollars in their house. They need to start focusing on hand tools what what the average person has in their house like table saw and drills and stuff like that not everyone has a massive router table with specialty fence and machine or a commercial band saw or massive commercial table saw or huge joiners and thickness planners. It’s not prectical for most people. The steps are short too like Ok do this whole section on this commercial machine that not average woodworker owns and only someone with a commercial company would even have access to but those people aren’t buying this book because they know how to do these things already they don’t need a book telling them how to do what the legit do as a career. The people buying this book are normal people trying to do this as a hobby for fun at home. So cater to them don’t take a short cut because it’s easy for you to tell someone to do something you can do in two seconds but those people have to somehow figure out how to do this one their own in a way not shown in the book because they don’t have the machines you do. It’s Being lazy and writing a book that’s almost completely useless to someone trying to make these projects. But if I did own all these machines and has all that space and money and materials it’s a good book.
Description: Turned wooden bowls can make your dining experience truely memorable or create a display piece to show off your talent. This class will focus on using basic turning tools and techniques to create these wooden bowls. Wood selection and mounting for grain orientation to get the most out of each piece will be discussed along with selection of proper tools. Skills learned in this class will prepare students for our Fingernail Bowl Gouge Class.

Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!
$1250.00 (Includes all Materials)                            . $300.00 Deposit (Balance due 30 days before class) In this class, we will cover different methods and techniques for cabinet construction. These methods can be applied to building kitchens, vanities, entertainment unit, build-in, home theaters or just a stand alone cabinet. We will build a cabinet using face frame, finish ends with frame and panel. We will cover topics such as door…
I got this idea from a Pinterest post. The final product looks so beautiful that I just couldn’t wait to make one for myself. This was somewhat a different experience from my other regular DIY projects as it doesn’t involve making something from scratch, but turning an existing wood piece into another one. Nonetheless, I enjoyed it very much and the final product was very satisfying. The tutorial I used is linked below.

Description: Want to learn the basics of wood turning or refresh your skills from Jr. High shop class? This class covers the basics, including shop and lathe safety, tool identification and selection, mounting wood to the lathe and wood selection. In the first half of the class students will turn the handle for a 1/4" turning tool to take home. In the second half they will work on a small project determined by the instructor.

Take advantage of this special '4 in 1' summer workshop ideal for expanding woodworking skills or for novices looking for a new craft. Begin by learning the artful processes of steam bending solid wood for functional and sculptural pieces, including lumber prep, building forms, and bending jigsaw drying racks.  Bringing your own unfinished pieces...
Finding a toolbox for a mechanic, for his hand tools, is not a big challenge at all - there are dozens of the tool boxes available on the market, from huge roll-around shop cases to small metal boxes. Plumbers, electricians, and farmers are well served, too, with everything from pickup-truck storage to toolboxes and belts. But, if you are a shop-bound woodworker then the case changes. You get to need a tool box that suits the range and variety of hand tools that most woodworkers like to have. For those who deny making do with second best, there's only one solution, you’ve to build a wooden toolbox that should be designed expressly for a woodworking shop.
×