Some tools required for this project are hole saw, drilling machine, pencil, tape measure, clamps, etc. This tutorial explains every step properly with images so that anyone can make a wooden sofa sleeve easily. Those, who prefer a video tutorial, can visit the below link to a YouTube video that illustrates the process of building a DIY Sofa Sleeve Cupholder.
Description: The intent of this class is to learn the basic skills and underlying principles used to construct an end grain board. This can be a cutting board, cheese board, butcher block, etc. The class is in three sessions because there are two overnight glue ups required. Day 1 we will discuss why to construct something end grain; how to prevent cracking; types of wood to use (and not use); required tools and their safe use; how to layout the board; performing the initial preparation of the stock and first glue up. Day 2 consists of cleaning the board up, cutting and arranging it into the desired final pattern, and the second glue up. Day 3 will be the final clean up; trimming; final sanding; edge routing/sanding; a discussion on finishes and how to maintain the board.
Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
$1320.00 (Includes all Materials)             . $300.00 Deposit (Balance due 30 days before class) This is one of our more popular classes. This beautiful table is well proportioned, with simple elegant lines that will grace any home. It can be used as a hall table, sofa table or an entry table. Imagine what your guest will say when they are welcome into your home and met with this stunning piece of furniture. This class covers all…
Furnishing and decorating your patio is not an easy task – but then again, it has to be done! Your patio is obviously one of the most important rooms in your home, as you can easily turn it into your little piece of Heaven, your “safe spot” in your home where you can retreat whenever you want to ignore the world and just spend some time alone all by yourself.
$995.00 (Includes all Materials)                                     . $300.00 Deposit (Balance due 30 days before class)     . This Stool was designed by Sam Maloof in 1950's. Sam could often be found sitting on a walnut leather laced stool, talking on the phone in his kitchen. We made several of these stools over the years. Now is your chance to create one of these historic iconic…
This plan is probably the easiest plan ever added in the list. The one who is working on this project, don’t need any professional skills but just knowing some basics of woodworking will be enough for this DIY. You will get step by step detailed process of this tutorial in the source linked tutorial. This tutorial will surely help you to build this plan quickly.
An ideal resource for woodworkers looking for a new project or wanting to spruce up their home! From kitchen improvements and storage solutions to classic furniture in the Craftsman and Adirondack styles, the experts at American Woodworker have provided plans and instructions for building 50 great-looking projects that will improve every space inside and outside your home.

Description: In this two day carving class the student will learn about the different styles of and how ball & claw feet were used on furniture of the 18th century. Come let Master carver and 2018 "Cartouche" winner Ray Journigan guide each student, even those will little carving experience, through the successful execution of carving a Philadelphia style Ball & Claw foot. Methods of layout, clamping, and tool sharpening will also be covered.


Description: Learn the art of decorating wood with burning from craftsmen, Jim Vogel. Jim will introduce you the basic skills you will need to know to enjoy the art of Pyrography. Students will learn about the control unit, temperature control, pen and tip selection, and the care and maintenance of the tool and tips. You will also learn to select wood, patterns, and how to transfer patterns to wood. Students will make a practice board and learn the various textures and lines they can create with the basic pens/tips. You will start a small project to complete at home. Woodburning unit and tips will be provided.
Description: The intent of this class is to learn the basic skills and underlying principles used to construct an end grain board. This can be a cutting board, cheese board, butcher block, etc. The class is in three sessions because there are two overnight glue ups required. Day 1 we will discuss why to construct something end grain; how to prevent cracking; types of wood to use (and not use); required tools and their safe use; how to layout the board; performing the initial preparation of the stock and first glue up. Day 2 consists of cleaning the board up, cutting and arranging it into the desired final pattern, and the second glue up. Day 3 will be the final clean up; trimming; final sanding; edge routing/sanding; a discussion on finishes and how to maintain the board.
Description: New to the shop environment? Not comfortable around machinery? Spend a day getting to know your way around with one of our experienced instructors. Students will learn the purpose and safe operations of the primary stationary tools such as the tablesaw, jointer, planer, bandsaw and drill press. This hands on class will give you a taste of how these tools take raw material and turn it into finished projects. To the beginner woodworker, this class will pave the way for participation in Woodworking Fundamentals 1.
Description: One of the first hand held power tools every novice wood worker should have in their arsenal is the router. With an assortment of sharp cutter bits, the router will become one of the most used small power tools in the shop. Although highly versatile, the router can be very intimidating; due to its size and the speed and torque it develops. In the Router 101 class, students will learn how to choose a router, the types of bases used with the router, and the care and feeding (maintenance) of the router. Students will also learn about the categories of router bits, the components used to identify them, what goes into the making of a router bit, and what to look for in making a choice of which bit best meets their needs. So come on out, bring your router and bits if you have them and learn basic routing techniques and tips and tricks to enhance your routing skills.
Drill four 5/8-in.-dia. 1/2-in.-deep holes on the large disc?inside the traced circle?then use 5/8-in. dowel centers to transfer the hole locations to the underside of the small disc. Drill four 1/2-in.-deep holes on the underside of the small disc and a 1/2-in.-deep hole in the center of the top for the dowel handle. Glue in the dowels to join the discs, and glue in the handle. We drilled a wood ball for a handle knob, but a screw-on ceramic knob also provides a comfortable, attractive grip.
Description: One of the first hand held power tools every novice wood worker should have in their arsenal is the router. With an assortment of sharp cutter bits, the router will become one of the most used small power tools in the shop. Although highly versatile, the router can be very intimidating; due to its size and the speed and torque it develops. In the Router 101 class, students will learn how to choose a router, the types of bases used with the router, and the care and feeding (maintenance) of the router. Students will also learn about the categories of router bits, the components used to identify them, what goes into the making of a router bit, and what to look for in making a choice of which bit best meets their needs. So come on out, bring your router and bits if you have them and learn basic routing techniques and tips and tricks to enhance your routing skills.
A super simple iPad Dock/stand made out of a single block of wood features an angled groove which gets to support the tablet device and a cut in a hole to revise access to the home button of your iPad. It’s possible to drill an access channel in the stand through which you can run a charging cable, although this mini stripped back iPad stand may have very limited functions.
×