We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.

Building a wine rack is usually a very common beginner's woodworking plan. Creating a wine rack is an easy plan that can most of the time be completed in a day or half, depending on how large and detailed you would like it to be. And the better news is that this free wine rack plan will let you build you a great looking wine rack for much less than it would cost.

Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.
Description: Sharp tools make all aspects of woodworking more enjoyable. But keeping them sharp has been a point of frustration that has steered many away from using them. This class will teach the techniques needed to maintain a sharp edge on your flat bench tools. In this class, all methods of sharpening will be discussed i.e. water stones, oil stones, wet/dry sandpaper, diamond stones and motorized discs. The use of honing compounds and strops will also be discussed. Come out and gain the skill and confidence needed to put a razor edge on all your bench tools.
Description: Come explore the world of chip carving! Geometric and free form designs created with a cutting knife and stab knife provide tremendous opportunities for artistic expression based on generations of tradition. This hands-on class will cover carving techniques, traditional as well as free form designs, layout and knife sharpening methods. Tools required: Chip carving cutting knife and stab knife, mechanical pencil with .5mm lead, eraser, T-square, and draftsman's compass. Recommended reading: The Complete Guide to Chip Carving by Wayne Barton.
Description: Lidded boxes are small "Treasure Chests" that can be made in many shapes and sizes on a lathe. They have been made many ways over the years with different options and embellishments. In this class, Dave Robinson breaks lidded box building down to the simplest and fastest method to complete the project. We will explore some of the fancier options that students can take to the next level on their own such as threaded lids, metal, exotic wood, and stone powder inlays. By sticking to the basics and the easiest ways, students will go home with a finished lidded box at the end of this session. Skills developed in this class translate to making a pepper mill and turning a platter or a bowl.
To corral shelf-dwelling books or DVDs that like to wander, cut 3/4-in.-thick hardwood pieces into 6-in. x 6-in. squares. Use a band saw or jigsaw to cut a slot along one edge (with the grain) that’s a smidgen wider than the shelf thickness. Stop the notch 3/4 in. from the other edge. Finish the bookend and slide it on the shelf. Want to build the shelves, too? We’ve got complete plans for great-looking shelves here.
​The plan tutorial includes images, diagrams, step-by-step instructions, and even a video to help you along the way. You can also go with some more bookcase design ideas. Browse the internet for more and we are also proving a link below to some more ideas to this plan. Select and build one of these free bookcase DIYs and you will have everything available easily that you need to get started creating a bookshelf for any room in your house.

​Luckily, we have also managed to find a detailed video tutorial of the Barn door project that illustrates the process of building a Barn door of your own. The steps and instructions in the video tutorial are different from the source links listed above. Actually, you can make different types of designs for your Barn door depending on which one you can afford easily and DIY on your own.
The use of hand tools is often the favorite part of a woodworkers project; hand tools are quiet and demand a level of concentration that makes one forget about everything else. Immerse yourself in this one-day hand tools intensive taught by master craftsman Glen Guarino of Guarino Furniture Designs. Students will start out with a block of wood from...
Designed for beginners with little to no woodworking experience, this five-session class covers wood physics, shop safety and etiquette, an introduction to joinery concepts, and hands-on experience with the most commonly used woodworking machines. The project for this class is a small side table featuring half-laps, bridle joints, and a round top....
I am sharing here a link to the detailed tutorial written by Pete at diypete.com, who shares the step by step process for making a wonderful barrel coffee table from scratch. He also tells you what items you’ll need for this project and where to find them. For example, you can buy an old whiskey barrel online or from a local whiskey store for a few bucks, if you haven’t already got one.

Description: The intent of this class is to learn the basic skills and underlying principles used to construct an end grain board. This can be a cutting board, cheese board, butcher block, etc. The class is in three sessions because there are two overnight glue ups required. Day 1 we will discuss why to construct something end grain; how to prevent cracking; types of wood to use (and not use); required tools and their safe use; how to layout the board; performing the initial preparation of the stock and first glue up. Day 2 consists of cleaning the board up, cutting and arranging it into the desired final pattern, and the second glue up. Day 3 will be the final clean up; trimming; final sanding; edge routing/sanding; a discussion on finishes and how to maintain the board.
There is no cost to use the database. Registering is not required. You should be able to browse the database and click through the links. Having said that, considering the fact there are so many browsers out there being used, this site's software might not allow some visitors to browse, it all depends on the Internet traffic, and your browser's compatibility.
Have you got an old whiskey barrel at home that you haven’t used for ages? If yes, this project is for you. You can make a really beautiful coffee table from that old whiskey barrel in a few easy steps. Apart from a coffee table, whiskey barrels can also be used to build several other furniture items. But that is a talk for later. Here, we will discuss how to make a coffee table from a whiskey barrel.
Making a garden arched footbridge out of some wood boards can be fun, hard working plan and also it’s quite rewarding. We are providing the project tutorial for how to build an arched footbridge without rails or having rails. If you take your hands of work and have some basic woodworking skills you can easily build this type of bridge. While this garden bridge is too small to walk over but it can make a really stunning addition to your lush yard or garden.
This time I surprised one of my favorite dice games and took it outside. I made a set of wooden dice in just a few hours, and instead of sitting in the room and doing nothing, we are taking our dice game out into the yard. With this set of wooden dice, dice games are becoming our favorite backyard game. Check out the step by step tutorial below so you can make your own.
×