Description: Without a doubt, the tablesaw is the most important power tool in the shop. Safely ripping stock to width, accurately cutting parts to length, cutting angles, bevels and making tenons and tapers are just a few of the tasks that an accurately set up tablesaw excels at. Understanding how the saw works is one of the goals of this new class and basic common sense safety will be covered thoroughly. We will begin with techniques to make safe and specialized cuts such as making accurate tenons and miters. Saw blade selection, dado blades and some of the commercially available accessories will be discussed. We will also demonstrate some basic but important shop made jigs. While this class will mostly be dom only, students will have the opportunity to do some cutting on the saw in order to make sure that each participant understands the techniques being shown.
$1555.00 (Includes all Materials)                        . $500.00 Deposit (Balance due 30 days before class) This is perhaps the most difficult class we offer at our school. This class is not for the faint hearted. This chair will challenge every area of your woodworking skill. We will be dealing with angles, proportion, chair design, choosing wood grain, sculpting of the crest rail using an angle grinder, inlay techniques for the back…
Here’s a traditional Swedish farm accessory for gunk-laden soles. The dimensions are not critical, but be sure the edges of the slats are fairly sharp?they’re what makes the boot scraper work. Cut slats to length, then cut triangular openings on the side of a pair of 2x2s. A radial arm saw works well for this, but a table saw or band saw will also make the cut. Trim the 2x2s to length, predrill, and use galvanized screws to attach the slats from underneath. If you prefer a boot cleaner that has brushes, check out this clever project.
Our staff of instructors possess a wide variety of skills and interests but an intense passion for the subject they are teaching is common to them all. Whether it is a woodcarving class with Will Neptune, a furniture making class with the school’s director, Bob Van Dyke, or a class on inlay and bandings with Steve Latta, students are assured of thoroughly learning the skills in a relaxed hands-on atmosphere.
Description: You're not finished until it's finished and this course help add the perfect touch to complete your project. You'll learn the concepts behind finishing, how to prepare your surface, how staining and dye work, and several basic finishes. You will practice the specific skills you need to apply a general purpose finish to your prized projects.
With a variety of styles covering every skill level, the Great Book of Woodworking Projects has something for everyone. Whether you want a challenging project that will beautify your home, such as a stunning Stickley chest of drawers, or you need a quick and easy project for a gift, such as a keepsake box or picture frame, you will find plans that will take a few hours or a weekend to complete.
Description: With endless possibilities, your biggest challenge will be deciding what you can do next with your scroll saw. This tool opens up the worlds of intarsia, fretwork, marquetry, and inlay work, just to begin! Learn blade selection, tensioning, and the pros and cons of fixed speed versus various speed saws while making several take-home projects.
Why would you buy a costly platform bed from Ikea or somewhere else when you can make one yourself at home? Oh yes, you can. A bed is the most common furniture piece used in the house and probably the costliest one. Wouldn’t it be great if you could just make a bed of your own, without having to spend many bucks for buying one? So I am here sharing a great tutorial to help you to build a nice comfy platform bed that you can use anywhere in the house.

Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.


Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!
Description: Without a doubt, the tablesaw is the most important power tool in the shop. Safely ripping stock to width, accurately cutting parts to length, cutting angles, bevels and making tenons and tapers are just a few of the tasks that an accurately set up tablesaw excels at. Understanding how the saw works is one of the goals of this new class and basic common sense safety will be covered thoroughly. We will begin with techniques to make safe and specialized cuts such as making accurate tenons and miters. Saw blade selection, dado blades and some of the commercially available accessories will be discussed. We will also demonstrate some basic but important shop made jigs. While this class will mostly be dom only, students will have the opportunity to do some cutting on the saw in order to make sure that each participant understands the techniques being shown.
There’s a lot of space above the shelf in most closets. Even though it’s a little hard to reach, it’s a great place to store seldom-used items. Make use of this wasted space by adding a second shelf above the existing one. Buy enough closet shelving material to match the length of the existing shelf plus enough for two end supports and middle supports over each bracket. Twelve-inch-wide shelving is available in various lengths and finishes at home centers and lumberyards.
Description: In this workshop, Ray shows and demonstrates the tools used to shape different furniture parts used in 18th century work. Tools such as spokeshaves, rasps and files, drawknives, scrapers, beaders and even some homemade tools that Ray uses to replicate period moldings and other features seen in period work. Other topics for shaping furniture parts will also be discussed such as steambending, bent laminations, and of course, carving.
​The plan tutorial includes images, diagrams, step-by-step instructions, and even a video to help you along the way. You can also go with some more bookcase design ideas. Browse the internet for more and we are also proving a link below to some more ideas to this plan. Select and build one of these free bookcase DIYs and you will have everything available easily that you need to get started creating a bookshelf for any room in your house.
This super-strong and simple-to-build workbench is may be the project you've been looking for a long time. You have to select some free workbench plans to create yourself a working table in your shed that after you can use it when you are working on your projects and maybe it can provide you some extra storage, depends upon which plan you are choosing to DIY.
×