Building a wine rack is usually a very common beginner's woodworking plan. Creating a wine rack is an easy plan that can most of the time be completed in a day or half, depending on how large and detailed you would like it to be. And the better news is that this free wine rack plan will let you build you a great looking wine rack for much less than it would cost.
And the fact is that you can make your own patio chair with several old but still good pallets. Here we are providing a tutorial that everybody can follow easily – it is very well-written and also self-explanatory, which is great for those who are a beginner at woodworking and have never completed a DIY project before. As you don’t need to be a professional woodworker or a handyman to complete this project, so it is not a difficult task – all you need is a bit of determination!​
From the image above it seems that you do not require a big tutorial to help you to build this candle holder. All you need is a wood panel, a hook and some nails/screws and do exactly what you see in the picture. Attach the hook to the wood panel using two screws and then, attach the panel to the wall using more nails or screws. That’s it. I hope this gets the job done.
We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.

Description: A foot stool is a great way to gain skills with hand tools. This useful piece of furniture can be used to rest the feet after a long day or as a sitting stool for that last arriving guest. In this class, after mastering mortise and tenons by hand, Ray will show you how to layout, cut, and shape Queen Anne cabriole legs without the need of a lathe. You may choose to carve ball & claw feet if you have already taken that class! Then, using rasp, spokeshaves, and scrapers, he will show you how to refine the curved shapes. For the more ambitious, Ray will demonstrate carving the applied scalloped shells that can be applied to the aprons and also how to execute the shell on the knees carved in the solid. You don't want to miss this one! It will take your woodworking to the next level! Now you will be ready to tackle the upcoming Queen Anne Side Chair! Tool List: You are encouraged to bring your general woodworking tools along with the following: For the Stool: 5/16" Mortise Chisel 1⁄4", 1⁄2", 3⁄4", 1" bench Chisels (If you have them) Mallet 6" or larger Rule Combination Square Tenon or Dovetail saw #49 or 50 Nicholson rasp or equalivant 10" Med cut cabinet file 8" Smooth cut wood file Spokeshave Square card scraper Smooth plane Block Plane Shoulder Plane Compass Carving parts: (optional): You are encouraged to bring your carving roll with chisels to include the following: 15/6mm v tool 7/14mm gouge (fishtail if purchasing) 2/12mm gouge 8/3mm gouge 2/30mm gouge 8/7mm gouge 5/8mm gouge (fishtail if purchasing) 8/10mm gouge 5/12mm gouge (fishtail if purchasing) 8/13mm gouge 5/25mm gouge 25/10mm Backbend gouge 7/6mm gouge (fishtail if purchasing) 7/10mm gouge (fishtail if purchasing)
If you bought this superb polished table in a store, it would cost you a fortune, but our detailed instructions will help you make one for less than $100. And it looks like highly polished stone, but no-one would know it’s actually made from concrete with a wooden base. Also, you can embellish the top with leaf prints, like the table shown here, or personalize it with glass or mosaic tiles or imprints of seashells.

Description: One of the first hand held power tools every novice wood worker should have in their arsenal is the router. With an assortment of sharp cutter bits, the router will become one of the most used small power tools in the shop. Although highly versatile, the router can be very intimidating; due to its size and the speed and torque it develops. In the Router 101 class, students will learn how to choose a router, the types of bases used with the router, and the care and feeding (maintenance) of the router. Students will also learn about the categories of router bits, the components used to identify them, what goes into the making of a router bit, and what to look for in making a choice of which bit best meets their needs. So come on out, bring your router and bits if you have them and learn basic routing techniques and tips and tricks to enhance your routing skills.
You can transfer a graphic on any wood piece of your choice, including a frame, top of a table, etc. The surface should be clean and big enough for the graphic paper. I am also sharing a video tutorial here that explains in detail the process of transferring any graphic to a wooden surface using a freezer paper. Just gather the items you need and follow this video to carve your favorite designs on your favorite wood items.

Description: Do you and your significant other want to learn basic wood working skills and have fun creating a one of a kind project together? We will provide the snacks, soft drinks, and materials. You only need to show up and be ready to make some saw dust. Projects will vary from month to month and will consist of small projects such as pens, bottle stoppers, bottle openers, picture holders, and wine bottle holders. This months project will be ... Tuition Of $150 Is PER COUPLE

Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.


The items you’ll need for this project include wood board, power drill, tape measure, adhesive, etc. Read the tutorial for details. Follow the steps properly to make a nice and strong wall rack. This rack makes use of magnets to hold metal items. The tutorial explains the procedure for building this beautiful wall rack. Make sure to use only high quality items for any woodworking project. Use the rack only to hang items that are not too heavy for the magnet to hold. Also, be careful while working around this wall rack and beware of the knives falling off the rack.
Can you believe that this amazing wine rack the image below has been built using old wood pallets? Perhaps you can. Isn’t it wonderful that your old wood pallets can be reused to build something so beautiful and useful? I am not a drinker but I liked the idea so much that I just couldn’t resist making myself one. Although later I gifted it to my parents, who totally loved it.
Looking to jump right into the world of fine woodworking? Is your goal is to continue creating projects long after attending one of our workshops? Then Introduction to Furniture Making is for you! Throughout this 16 hour intensive workshop (split over 4 or 6 sessions), students will build a solid foundation for their new venture into woodworking....
This particular tray is made using reclaimed barn wood but the author of the project Beyond The Picket Fence surprised everyone with one fact: reclaimed barn wood has often some areas turned pink due to cow urine. If you check the project more closely, you’ll also notice some areas of the tray being almost bright pink. That’s something you don’t see every day!
Description: Sharp tools make all aspects of woodworking more enjoyable. But keeping them sharp has been a point of frustration that has steered many away from using them. This class will teach the techniques needed to maintain a sharp edge on your flat bench tools. In this class, all methods of sharpening will be discussed i.e. water stones, oil stones, wet/dry sandpaper, diamond stones and motorized discs. The use of honing compounds and strops will also be discussed. Come out and gain the skill and confidence needed to put a razor edge on all your bench tools.

$360.00 (Includes all Materials)               . $100 Deposit (Balance due 30 days before class) There is nothing like the experience of using sharp tools. Where the actual tool does what you want it to do with ease. You should not have to fight with your tools. They should work for you and with you. In this class, we will cover a variety of techniques for sharpening edge tools including the use of Japanese water stones.…
$700.00 (Includes all Materials)                 . $200.00 Deposit (Balance due 30 days before class) In this 4 day class you’ll be able to build this beautiful sharpening pond for your shop. I designed this pond to be a relaxing and stress free place to hone your tools as I believe sharp tools are so important in working wood. Not only are sharp tools a joy to use but they are also safer. In the…
Have you got an old whiskey barrel at home that you haven’t used for ages? If yes, this project is for you. You can make a really beautiful coffee table from that old whiskey barrel in a few easy steps. Apart from a coffee table, whiskey barrels can also be used to build several other furniture items. But that is a talk for later. Here, we will discuss how to make a coffee table from a whiskey barrel.

Description: The bandsaw is one of your most versatile power tools, and this class will show you how to safely get the most out of it. Mike will show you how to set up your bandsaw for consistent accuracy and teach you proper blade selection. Learn how to perform straight cuts, curves, and how to rough saw cabriole lets. You'll also learn the secrets of resawing: a technique that can save you money and add uniqueness to your projects
Description: This class is intended to teach safe knife making to woodworkers of any skill level. Starting with a knife blank, you will learn how to select, prepare and fasten the handle material. Then you will learn how to shape, polish and finish the handle and the metal. Advanced techniques such as folding knives and compound handles may also be taught depending on time. Each student should go home with a completed knife. STUDENT PROVIDES/BUYS KNIFE KIT AND SCALES.
Description: Spend a weekend with Woodcraft and leave with a traditional Adirondack chair. This course is designed for the entry to intermediate level woodworker who would like to improve their furniture building skills. You will work with both power and hand tools to cut, drill, sand and assemble this classic chair. Instructions, drawings, cypress wood and fasteners are included in the tuition.
Some tools required for this project are hole saw, drilling machine, pencil, tape measure, clamps, etc. This tutorial explains every step properly with images so that anyone can make a wooden sofa sleeve easily. Those, who prefer a video tutorial, can visit the below link to a YouTube video that illustrates the process of building a DIY Sofa Sleeve Cupholder.
$400.00 (Includes all Materials)               . $100.00 Deposit ( Balance due 30 days before class) Using inlay to embellish your projects can be very rewarding. It's a way to take your work to the next level, to set yourself apart from others. In this intensive two day class we will cover the following topics. 1. Tools, including the jeweler's fretsaw, carving tools, shop made vises, and a vise that I personally designed and use. 2.…

The items you’ll need for this project include wood board, power drill, tape measure, adhesive, etc. Read the tutorial for details. Follow the steps properly to make a nice and strong wall rack. This rack makes use of magnets to hold metal items. The tutorial explains the procedure for building this beautiful wall rack. Make sure to use only high quality items for any woodworking project. Use the rack only to hang items that are not too heavy for the magnet to hold. Also, be careful while working around this wall rack and beware of the knives falling off the rack.


Description: A foot stool is a great way to gain skills with hand tools. This useful piece of furniture can be used to rest the feet after a long day or as a sitting stool for that last arriving guest. In this class, after mastering mortise and tenons by hand, Ray will show you how to layout, cut, and shape Queen Anne cabriole legs without the need of a lathe. You may choose to carve ball & claw feet if you have already taken that class! Then, using rasp, spokeshaves, and scrapers, he will show you how to refine the curved shapes. For the more ambitious, Ray will demonstrate carving the applied scalloped shells that can be applied to the aprons and also how to execute the shell on the knees carved in the solid. You don't want to miss this one! It will take your woodworking to the next level! Now you will be ready to tackle the upcoming Queen Anne Side Chair! Tool List: You are encouraged to bring your general woodworking tools along with the following: For the Stool: 5/16" Mortise Chisel 1⁄4", 1⁄2", 3⁄4", 1" bench Chisels (If you have them) Mallet 6" or larger Rule Combination Square Tenon or Dovetail saw #49 or 50 Nicholson rasp or equalivant 10" Med cut cabinet file 8" Smooth cut wood file Spokeshave Square card scraper Smooth plane Block Plane Shoulder Plane Compass Carving parts: (optional): You are encouraged to bring your carving roll with chisels to include the following: 15/6mm v tool 7/14mm gouge (fishtail if purchasing) 2/12mm gouge 8/3mm gouge 2/30mm gouge 8/7mm gouge 5/8mm gouge (fishtail if purchasing) 8/10mm gouge 5/12mm gouge (fishtail if purchasing) 8/13mm gouge 5/25mm gouge 25/10mm Backbend gouge 7/6mm gouge (fishtail if purchasing) 7/10mm gouge (fishtail if purchasing)
We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
Description: Computer Numeric Control -- CNC – is a system where a user can conceive & design a project, then let the computer controlled hardware produce it. This class will explore the fundamentals of CNC processing including terminology, concepts, processes & hardware systems. We will work through the basic work flow of manufacturing by CNC by exploring in detail the stages of: concept definition, design, engineering, machining and finish & assembly. Each of these stages will be demonstrated using a project of the student's interest with a goal of completing the finished piece if student load and time permit.

Drill four 5/8-in.-dia. 1/2-in.-deep holes on the large disc?inside the traced circle?then use 5/8-in. dowel centers to transfer the hole locations to the underside of the small disc. Drill four 1/2-in.-deep holes on the underside of the small disc and a 1/2-in.-deep hole in the center of the top for the dowel handle. Glue in the dowels to join the discs, and glue in the handle. We drilled a wood ball for a handle knob, but a screw-on ceramic knob also provides a comfortable, attractive grip.


The best thing about the toy chest is that it is very easy to build. All you need is the basic understanding of woodworking and a few tools to get started. You can also modify your kid’s toy chest in any way you want or build in a different design or color different from the one pictured above. You can try some other designs for your plan in the below-mentioned link.
×