As soon as I came across this tutorial, I didn’t wait any longer to start building one. Some of the items you need for this project are hardwood plywood, saw, glue, nails, drilling machine, etc. The video is very easy to follow for anyone with basic woodworking knowledge and experience. The first source link also includes a step by step procedure in plain English for those, who are not comfortable enough with the video tutorial.
This particular tray is made using reclaimed barn wood but the author of the project Beyond The Picket Fence surprised everyone with one fact: reclaimed barn wood has often some areas turned pink due to cow urine. If you check the project more closely, you’ll also notice some areas of the tray being almost bright pink. That’s something you don’t see every day!
This plan is probably the easiest plan ever added in the list. The one who is working on this project, don’t need any professional skills but just knowing some basics of woodworking will be enough for this DIY. You will get step by step detailed process of this tutorial in the source linked tutorial. This tutorial will surely help you to build this plan quickly.
Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.

We will suggest you select the simple Birdhouse if you are new at woodworking but be sure to select its design with respect to the place where you are going to hang/place it. One of our simple Birdhouse tutorials will help you building one. We have managed to include a source tutorial below that will help you to understand illustrates and the instruction to building a simple Birdhouse.
Description: Turned wooden bowls can make your dining experience truely memorable or create a display piece to show off your talent. This class will focus on using basic turning tools and techniques to create these wooden bowls. Wood selection and mounting for grain orientation to get the most out of each piece will be discussed along with selection of proper tools. Skills learned in this class will prepare students for our Fingernail Bowl Gouge Class.

This particular tray is made using reclaimed barn wood but the author of the project Beyond The Picket Fence surprised everyone with one fact: reclaimed barn wood has often some areas turned pink due to cow urine. If you check the project more closely, you’ll also notice some areas of the tray being almost bright pink. That’s something you don’t see every day!
Description: Normally we use the lathe to turn perfectly round spindles or vessels "on axis". By changing the axis of rotation during a turning project, very interesting and unusual shapes develop. During this class students will learn the basic concepts that make this style of turning so unique. This knowledge can then be incorporated into your future spindle and face plate projects.
Description: Learn how to create a unique beautiful piece of art, using one of the most versatile and useful tools in the shop. TheBand Saw Box is created from a block of wood that is either laminated or solid, containing drawers or hidden compartments. Students will learn how to plan, layout, cut, and craft an eye-catching project using a minimum of major woodworking tools. This project is a fun method that will increase your Band Saw skills and create fantastic gifts.
Description: Learn to make a cutting board with various species of wood. You will prepare, glue, cut on a band saw, rout, and finally apply a food-safe finish. This process will result in a stunning cutting board! You will learn how to use a router and one of our templates to make a fun shape or choose to keep a traditional rectangular shape. Some sanding and finishing will need to be completed at home.
And the fact is that you can make your own patio chair with several old but still good pallets. Here we are providing a tutorial that everybody can follow easily – it is very well-written and also self-explanatory, which is great for those who are a beginner at woodworking and have never completed a DIY project before. As you don’t need to be a professional woodworker or a handyman to complete this project, so it is not a difficult task – all you need is a bit of determination!​
Description: This class is intended to teach safe knife making to woodworkers of any skill level. Starting with a knife blank, you will learn how to select, prepare and fasten the handle material. Then you will learn how to shape, polish and finish the handle and the metal. Advanced techniques such as folding knives and compound handles may also be taught depending on time. Each student should go home with a completed knife. STUDENT PROVIDES/BUYS KNIFE KIT AND SCALES.
Description: Without a doubt, the tablesaw is the most important power tool in the shop. Safely ripping stock to width, accurately cutting parts to length, cutting angles, bevels and making tenons and tapers are just a few of the tasks that an accurately set up tablesaw excels at. Understanding how the saw works is one of the goals of this new class and basic common sense safety will be covered thoroughly. We will begin with techniques to make safe and specialized cuts such as making accurate tenons and miters. Saw blade selection, dado blades and some of the commercially available accessories will be discussed. We will also demonstrate some basic but important shop made jigs. While this class will mostly be dom only, students will have the opportunity to do some cutting on the saw in order to make sure that each participant understands the techniques being shown.
Always nice to see project ideas. Yet, to make a living while woodworking all projects need to be scaled up so that one can actually earn enough to survive and compete against the flood of Chinese imports and others. Substitute products made from plastic, metal or wood are a common place and normally cheaper due to mass production and human rights violations. Politicians don’t care about the disappearance of many of America’s Cottage Industries and most consumers don’t care as well.
This is another example of small woodwork projects that require good time and woodworking skills. This item is built using multiple wooden parts. Each part is shaped in a specific design and then all parts are attached together to make the final TV set. I have never tried building this one, mostly because I don’t own an iPhone, but also because making this item is not an easy task. By the way, it works fine with all kinds of phones.
Description: A foot stool is a great way to gain skills with hand tools. This useful piece of furniture can be used to rest the feet after a long day or as a sitting stool for that last arriving guest. In this class, after mastering mortise and tenons by hand, Ray will show you how to layout, cut, and shape Queen Anne cabriole legs without the need of a lathe. You may choose to carve ball & claw feet if you have already taken that class! Then, using rasp, spokeshaves, and scrapers, he will show you how to refine the curved shapes. For the more ambitious, Ray will demonstrate carving the applied scalloped shells that can be applied to the aprons and also how to execute the shell on the knees carved in the solid. You don't want to miss this one! It will take your woodworking to the next level! Now you will be ready to tackle the upcoming Queen Anne Side Chair! Tool List: You are encouraged to bring your general woodworking tools along with the following: For the Stool: 5/16" Mortise Chisel 1⁄4", 1⁄2", 3⁄4", 1" bench Chisels (If you have them) Mallet 6" or larger Rule Combination Square Tenon or Dovetail saw #49 or 50 Nicholson rasp or equalivant 10" Med cut cabinet file 8" Smooth cut wood file Spokeshave Square card scraper Smooth plane Block Plane Shoulder Plane Compass Carving parts: (optional): You are encouraged to bring your carving roll with chisels to include the following: 15/6mm v tool 7/14mm gouge (fishtail if purchasing) 2/12mm gouge 8/3mm gouge 2/30mm gouge 8/7mm gouge 5/8mm gouge (fishtail if purchasing) 8/10mm gouge 5/12mm gouge (fishtail if purchasing) 8/13mm gouge 5/25mm gouge 25/10mm Backbend gouge 7/6mm gouge (fishtail if purchasing) 7/10mm gouge (fishtail if purchasing)
Making an art or a design on a wooden piece is a hectic task and requires good art skills. But there is another much easier way to carve a beautiful art on any wood surface. For this, you will need the image or graphic that you want to transfer, a piece of wood, freezer paper, etc. I, myself have made several such designs. At the source below, you can find a step by step guide for transferring a graphic image to the wood.
Turning an old door into a photo frame is another easy woodwork project. All you need is an old door and some woodworking tools and items. I am here sharing the link to the source tutorial that explains the step by step procedure for building a picture frame from an old wooden door. This tutorial was originally written by Tracy Snyder at athomewithsweett.blogspot.com who also tells you what items you may need and where to find them. If you haven’t already got an old door, you can purchase one from websites like Craigslist.
Why would you buy a costly platform bed from Ikea or somewhere else when you can make one yourself at home? Oh yes, you can. A bed is the most common furniture piece used in the house and probably the costliest one. Wouldn’t it be great if you could just make a bed of your own, without having to spend many bucks for buying one? So I am here sharing a great tutorial to help you to build a nice comfy platform bed that you can use anywhere in the house.

$360.00 (Includes all Materials except the Plane) $100.00 Deposit (Balance due 30 days before class) In this two day class we will reveal some of the secrets to tuning up a Japanese Hand Plane (Kanna) We will start with conditioning the Body of the Plane (DAI) to stabilize movement. Proper sharpening and grinding of the blade and chip breaker will be discussed and demonstrated. Custom fitting the blade to the Dai and conditioning the sole. We will also demystified the…
This super-strong and simple-to-build workbench is may be the project you've been looking for a long time. You have to select some free workbench plans to create yourself a working table in your shed that after you can use it when you are working on your projects and maybe it can provide you some extra storage, depends upon which plan you are choosing to DIY.
×