The items you’ll need for this project include wood board, power drill, tape measure, adhesive, etc. Read the tutorial for details. Follow the steps properly to make a nice and strong wall rack. This rack makes use of magnets to hold metal items. The tutorial explains the procedure for building this beautiful wall rack. Make sure to use only high quality items for any woodworking project. Use the rack only to hang items that are not too heavy for the magnet to hold. Also, be careful while working around this wall rack and beware of the knives falling off the rack.
For a fun and comprehensive learning experience, take an online woodworking class in the WWGOA Academy. You’ll learn in-depth woodworking how-to, get bonus material, and enjoy custom benefits for class participants. You’ll never lose access to your Class; no strings attached! Check back often – as we’re adding new online woodworking classes regularly.
This rack can be built from old unused wood pallets you can find around the house. So it is also a great way to recycle those old pallets. You can also find a step by step tutorial at instructables.com for which I have included the source link below. This tutorial helps you to make a wood wine rack from the scratch. So what are waiting for? Just grab the items you need and start building a cool wooden rack for those nice wine bottles of yours.
The space behind a door is a storage spot that’s often overlooked. Build a set of shallow shelves and mount it to the wall behind your laundry room door. The materials are inexpensive. Measure the distance between the door hinge and the wall and subtract an inch. This is the maximum depth of the shelves. We used 1x4s for the sides, top and shelves. Screw the sides to the top. Then screw three 1×2 hanging strips to the sides: one top and bottom and one centered. Nail metal shelf standards to the sides. Complete the shelves by nailing a 1×2 trim piece to the sides and top. The 1×2 dresses up the shelf unit and keeps the shelves from falling off the shelf clips.
$995.00 (Includes all Materials)                                     . $300.00 Deposit (Balance due 30 days before class)     . This Stool was designed by Sam Maloof in 1950's. Sam could often be found sitting on a walnut leather laced stool, talking on the phone in his kitchen. We made several of these stools over the years. Now is your chance to create one of these historic iconic…
Description: Come explore the world of chip carving! Geometric and free form designs created with a cutting knife and stab knife provide tremendous opportunities for artistic expression based on generations of tradition. This hands-on class will cover carving techniques, traditional as well as free form designs, layout and knife sharpening methods. Tools required: Chip carving cutting knife and stab knife, mechanical pencil with .5mm lead, eraser, T-square, and draftsman's compass. Recommended reading: The Complete Guide to Chip Carving by Wayne Barton.
$400.00 (Includes all Materials)               . $100.00 Deposit ( Balance due 30 days before class) Using inlay to embellish your projects can be very rewarding. It's a way to take your work to the next level, to set yourself apart from others. In this intensive two day class we will cover the following topics. 1. Tools, including the jeweler's fretsaw, carving tools, shop made vises, and a vise that I personally designed and use. 2.…
Description: Learn the art of decorating wood with burning from craftsmen, Jim Vogel. Jim will introduce you the basic skills you will need to know to enjoy the art of Pyrography. Students will learn about the control unit, temperature control, pen and tip selection, and the care and maintenance of the tool and tips. You will also learn to select wood, patterns, and how to transfer patterns to wood. Students will make a practice board and learn the various textures and lines they can create with the basic pens/tips. You will start a small project to complete at home. Woodburning unit and tips will be provided.
$1250.00 (Includes all Materials)            . $300.00 Deposit (Balance due 30 days before class) In this class not only will we build this beautiful coffee table inspired by Greene and Greene, Stickley and a little bit of Krenov, but we will learn many table construction techniques. Reading wood grain, Mortise & tenon, shaping wood, bread board ends, drawer construction, fitting the drawer, as well as many of the Greene and Greene details such as square ebony…
The space behind a door is a storage spot that’s often overlooked. Build a set of shallow shelves and mount it to the wall behind your laundry room door. The materials are inexpensive. Measure the distance between the door hinge and the wall and subtract an inch. This is the maximum depth of the shelves. We used 1x4s for the sides, top and shelves. Screw the sides to the top. Then screw three 1×2 hanging strips to the sides: one top and bottom and one centered. Nail metal shelf standards to the sides. Complete the shelves by nailing a 1×2 trim piece to the sides and top. The 1×2 dresses up the shelf unit and keeps the shelves from falling off the shelf clips.
I built my first platform bed by following the steps mentioned in the tutorial and the end result was everything I expected. It was as beautiful as comfortable and strong. It only cost me around $60 to build this one from the scratch. And if I can build it, anyone can. What you need is a little bit of woodworking experience and a lot of confidence. Collect the items as suggested in the video and start working now.

Description: Painted furniture is all the rave today. Using Black Dog Furniture Paint, come learn how to transform those yard sale finds, thrift store picks or your grandmother's hand me downs into unique beautiful treasures for your home. Bring a small piece of furniture (chair, small side table etc.) that is good condition (no major repairs etc.) and we will provide the rest of supplies needed to transform your trash to treasure. Student can email a photo of furniture to instructor prior to class to make sure that it is suitable piece to paint). In this class you will learn the basics of prepping, painting, distressing, waxing and sealing.


The Saw Guy - Saw Reviews and DIY Projects Copyright © 2019. Copyright text 2018 by The Saw Guy - Saw Reviews and DIY Projects. TheSawGuy.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Full affiliate disclaimer here
Description: You're not finished until it's finished and this course help add the perfect touch to complete your project. You'll learn the concepts behind finishing, how to prepare your surface, how staining and dye work, and several basic finishes. You will practice the specific skills you need to apply a general purpose finish to your prized projects.

$875.00 (Includes all Materials)         . $300.00 Deposit (Balance due 30 days before class) We have an exceptional opportunity offering a class taught by David A Wade, who had worked along side Sam Maloof for over 25 years. David sculpted many of Sam’s creations from the iconic sculpted rocking chair to the sculpted table. Many refer to sculpted Maloof pieces as “sensuous” and are drawn to touch his works. Every woodworker desiring to enhance their craft will benefit…


Description: Have you toyed with the idea of building your own cabinets for the kitchen, or the garage? And, as all woodworkers realize, the shop never has enough storage? If this synopsis connects with you, then Woodcraft's new Cabinet Making Series may fill the bill for you. The Cabinet Making Series is designed to maintain continuity by combining all the components of basic cabinetry in 17 hours (three sessions) of classroom and ptractical hands on instruction. Students will learn bisc fundamentals in how to choose and prepare stock to construct Base Units, Upper Wall Units, Drawers and Raised Panel Doors. Stock preparation will be accomplished utilizing the jointer, planer, electric miter saw, tablesaw and router table. Cabinet carcasses will be assembled using standard techniques and face frames will be assembled and attached using the Kreg Pocket Hole System. So, come on out, learn the techniques for making your own cabinets from the planning stage to ta finished product complete with drawers and doors.
Description: Without a doubt, the tablesaw is the most important power tool in the shop. Safely ripping stock to width, accurately cutting parts to length, cutting angles, bevels and making tenons and tapers are just a few of the tasks that an accurately set up tablesaw excels at. Understanding how the saw works is one of the goals of this new class and basic common sense safety will be covered thoroughly. We will begin with techniques to make safe and specialized cuts such as making accurate tenons and miters. Saw blade selection, dado blades and some of the commercially available accessories will be discussed. We will also demonstrate some basic but important shop made jigs. While this class will mostly be dom only, students will have the opportunity to do some cutting on the saw in order to make sure that each participant understands the techniques being shown.
$400.00 (Includes all Materials)               . $100.00 Deposit ( Balance due 30 days before class) Using inlay to embellish your projects can be very rewarding. It's a way to take your work to the next level, to set yourself apart from others. In this intensive two day class we will cover the following topics. 1. Tools, including the jeweler's fretsaw, carving tools, shop made vises, and a vise that I personally designed and use. 2.…
The items you’ll need for this project include wood board, power drill, tape measure, adhesive, etc. Read the tutorial for details. Follow the steps properly to make a nice and strong wall rack. This rack makes use of magnets to hold metal items. The tutorial explains the procedure for building this beautiful wall rack. Make sure to use only high quality items for any woodworking project. Use the rack only to hang items that are not too heavy for the magnet to hold. Also, be careful while working around this wall rack and beware of the knives falling off the rack.
Isn’t this amazing that instead of having to throw that old furniture piece away, you can now reuse it to build something even more beautiful? If you do not like this particular idea, there are many other re-purposeful furniture items you can build from an old dresser. Just search the internet for other DIY project ideas. Here is a link to the video tutorial that explains the same procedure in a more practical manner that you can easily follow through.

Building a Wooden Office Desk Organizer is an easy task for a professional woodworker, but not so much for normal people like you and me. But that doesn’t mean you cannot do this. Two years ago, I had almost no woodworking experience, but now I make most of my household and office wooden items by myself. This saves me a lot of money. And believe me when I say this; you can also manage to make wonderful wood items with a little practice and some woodworking experience.
There is no cost to use the database. Registering is not required. You should be able to browse the database and click through the links. Having said that, considering the fact there are so many browsers out there being used, this site's software might not allow some visitors to browse, it all depends on the Internet traffic, and your browser's compatibility.
The beauty of this project lies in the simplicity. All you need are 3 pieces of wood of your choice (though we must admit natural hardwoods will look incredible), sanding block, clamps, wood glue and finishing product. The hardest step of the whole tutorial is measuring – as always, measure 9 times, cut once! You wouldn’t want to finish your project and then realize it doesn’t have enough space to fit your DVD player, would you?
Description: New to the shop environment? Not comfortable around machinery? Spend a day getting to know your way around with one of our experienced instructors. Students will learn the purpose and safe operations of the primary stationary tools such as the tablesaw, jointer, planer, bandsaw and drill press. This hands on class will give you a taste of how these tools take raw material and turn it into finished projects. To the beginner woodworker, this class will pave the way for participation in Woodworking Fundamentals 1.
The items you’ll need for this project include wood board, power drill, tape measure, adhesive, etc. Read the tutorial for details. Follow the steps properly to make a nice and strong wall rack. This rack makes use of magnets to hold metal items. The tutorial explains the procedure for building this beautiful wall rack. Make sure to use only high quality items for any woodworking project. Use the rack only to hang items that are not too heavy for the magnet to hold. Also, be careful while working around this wall rack and beware of the knives falling off the rack.
This is one of those things that you never know you need unless you have one. This amazing wooden sofa sleeve works perfectly on either or both sides of a sofa set. It gives your sofa a nice look. The sleeve can also be modified to include a cup holder, mobile holder, etc. You can easily find this item on any online furniture store, but an even better idea is to build one. This way, you can make a sofa sleeve design that you actually like and make space for cup and other things.
Description: Do you and your significant other want to le3arn basic wood working skills and have fun creating a one of a kind project together? We will provide the food, soft drinks, and materials. You only need to show up and be ready to make some saw dust. Projects will vary from month to month and will consist of small projects such as pens, bottle stoppers/openers, pepper grinders, etc.

You can transfer a graphic on any wood piece of your choice, including a frame, top of a table, etc. The surface should be clean and big enough for the graphic paper. I am also sharing a video tutorial here that explains in detail the process of transferring any graphic to a wooden surface using a freezer paper. Just gather the items you need and follow this video to carve your favorite designs on your favorite wood items.
Here, I am writing about another DIY project that involves the use of an old furniture piece. I think that the idea of reusing and recycling old furniture has got to me. Anyways, I am starting to love it. This project involves using an old door to build a beautiful multi picture frame, as you can see in the image below. This frame looks really wonderful and can be used to hold many pictures at a time.
Copyright 2018 by Cut The Wood. CutTheWood.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, CutTheWood.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.
A super simple iPad Dock/stand made out of a single block of wood features an angled groove which gets to support the tablet device and a cut in a hole to revise access to the home button of your iPad. It’s possible to drill an access channel in the stand through which you can run a charging cable, although this mini stripped back iPad stand may have very limited functions.
×