This corner stone joint of western woodwork has also been used in the Japanese tradition for a long time. Class we will cover: sizing, proportioning, choice of angle, layout and cutting as well as where to use dovetails. You will see examples of full, half blind and blind dovetails. There will be a full cutting and assembly demonstration as well...
The best thing about the toy chest is that it is very easy to build. All you need is the basic understanding of woodworking and a few tools to get started. You can also modify your kid’s toy chest in any way you want or build in a different design or color different from the one pictured above. You can try some other designs for your plan in the below-mentioned link.
You can transfer a graphic on any wood piece of your choice, including a frame, top of a table, etc. The surface should be clean and big enough for the graphic paper. I am also sharing a video tutorial here that explains in detail the process of transferring any graphic to a wooden surface using a freezer paper. Just gather the items you need and follow this video to carve your favorite designs on your favorite wood items.
A few days back, I was searching for some cool DIY plans. So, I got to work and ended up coming up with some easy to follow project and an awesome new ice chest cooler to have out on the deck! It was going to be perfect for summer hangouts and barbecues. It was a fun and practical plan to work on and I know you will have fun tackling select a design from this plan and start building your own. Enjoy learning how you can build a rustic cooler also sing the video tutorial and source tutorial plan!
You can also make one for elders and put it in your garden or terrace or anywhere in the house. Elders can use it to relax and kids can use it to play or sleep. Although this is a really beautiful piece of woodwork, it is not that easy to make. Only someone with good woodworking skill can think of making this swing set. Also, I couldn’t find a good tutorial that illustrates the process of building a wooden boat-shaped swing set. Most Probably, I will write one when I build mine.But if you really want this swing set like right now, I would suggest you hire a good woodworker, who can build something similar. Or just search the internet and maybe you get lucky enough to find a tutorial for this. Good luck either way.
Description: Have you ever gone to one of those expensive framing shops and been taken back by the cost of a picture frame? Here is the opportunity to learn how to make your own frames and save money. The Picture Framing class will show you the basics for measuring and making your own picture frames. You will be shown how to use woodworking joinery that can be incorporated in your framing projects which are not only functional, but decorative as well. You will use the jointer and table saw to square stock, the table saw and the electric miter saw to cut mitered corners, and the router table to create assorted decorative profiles for your frames. Students will make the components for an 8" X 10" picture frame.
If you bought this superb polished table in a store, it would cost you a fortune, but our detailed instructions will help you make one for less than $100. And it looks like highly polished stone, but no-one would know it’s actually made from concrete with a wooden base. Also, you can embellish the top with leaf prints, like the table shown here, or personalize it with glass or mosaic tiles or imprints of seashells.
Description: With endless possibilities, your biggest challenge will be deciding what you can do next with your scroll saw. This tool opens up the worlds of intarsia, fretwork, marquetry, and inlay work, just to begin! Learn blade selection, tensioning, and the pros and cons of fixed speed versus various speed saws while making several take-home projects.
Designed for beginners with little to no woodworking experience, this five-session class covers wood physics, shop safety and etiquette, an introduction to joinery concepts, and hands-on experience with the most commonly used woodworking machines. The project for this class is a small side table featuring half-laps, bridle joints, and a round top....
Some tools that are required for this project are Miter saw, drilling machine, pencil, tape measure, screws, etc. Those, who prefer a video tutorial instead, can visit the below link to a YouTube video tutorial that illustrates the process of creating a DIY Beer Bottle Crate. The video tutorial explains every step properly so that anyone can make a Beer bottle crate easily.
Description: Come spend some time with us and make a small (about sixteen inch tall) three legged stool. A perfect size to use as a foot stool or as a fire side stool. This class will teach a multitude of turning skills, from face plate and spindle turning to duplicating and assembly. Finishing options will also be discussed. The skills and knowledge learned can be used to make taller stools and may also be used for other turned furniture projects. Turning tools will be provided but you may bring your own.
Description: The intent of this class is to learn the basic skills and underlying principles used to construct an end grain board. This can be a cutting board, cheese board, butcher block, etc. The class is in three sessions because there are two overnight glue ups required. Day 1 we will discuss why to construct something end grain; how to prevent cracking; types of wood to use (and not use); required tools and their safe use; how to layout the board; performing the initial preparation of the stock and first glue up. Day 2 consists of cleaning the board up, cutting and arranging it into the desired final pattern, and the second glue up. Day 3 will be the final clean up; trimming; final sanding; edge routing/sanding; a discussion on finishes and how to maintain the board.
Description: In this two day carving class the student will learn about the different styles of and how ball & claw feet were used on furniture of the 18th century. Come let Master carver and 2018 "Cartouche" winner Ray Journigan guide each student, even those will little carving experience, through the successful execution of carving a Philadelphia style Ball & Claw foot. Methods of layout, clamping, and tool sharpening will also be covered.
Description: Lidded boxes are small "Treasure Chests" that can be made in many shapes and sizes on a lathe. They have been made many ways over the years with different options and embellishments. In this class, Dave Robinson breaks lidded box building down to the simplest and fastest method to complete the project. We will explore some of the fancier options that students can take to the next level on their own such as threaded lids, metal, exotic wood, and stone powder inlays. By sticking to the basics and the easiest ways, students will go home with a finished lidded box at the end of this session. Skills developed in this class translate to making a pepper mill and turning a platter or a bowl.
$1595.00 (Includes all Materials) . $500.00 Deposit (Balance due 30 days before class) The focus of this class will be making a sculpted rocking chair. We will explore the joinery, bent lamination, sculpting, balance and comfort that make this chair so special. This is an advanced class and requires the student to have knowledge and experience with basic hand tools like rasps, gouges, spokeshaves and block planes. We will also use…
Description: This is a more in depth class about bench planes than above. In this class, let period furniture maker Ray Journigan show you how to make using a bench plane your new favorite go to tool. Lean what makes one plane better than another? Then Ray demonstrates the steps of flattening a wide board using hand planes followed by each student having the opportunity to surface a board to "finish ready" without any sanding using their hand planes. In this class we take the plane apart and explain all the adjustments to properly tune up your hand plane. Then block planes are discussed showing their importance in furniture work. Next, for those REALLY interested in learning how different types of handplanes were used, Ray will show and demonstrate the use of specialty planes such as Rabbit planes, Shoulder planes, Dado planes, Dovetail planes, Scraper planes, and molding planes. Lastly we turn our attention to sharpening to a razor edge. Student leave with an eye opening experience having learned thru practice, the joy and ease of using hand planes.
$1125.00 (Includes All Materials) . Deposit $300.00 (Balance due 30 days before class) In this class we will explore the works of one of my favorite woodworkers, George Nakashima. This chair has elegance, simplicity, subtle details, and beauty. Don't let its simplicity fool you. This chair requires great skill and precision to execute. It involves carving and sculpting of the seat with power and hand tools. The complex joinery has to be done accurately to ensure…
Turning an old door into a photo frame is another easy woodwork project. All you need is an old door and some woodworking tools and items. I am here sharing the link to the source tutorial that explains the step by step procedure for building a picture frame from an old wooden door. This tutorial was originally written by Tracy Snyder at athomewithsweett.blogspot.com who also tells you what items you may need and where to find them. If you haven’t already got an old door, you can purchase one from websites like Craigslist.
Always nice to see project ideas. Yet, to make a living while woodworking all projects need to be scaled up so that one can actually earn enough to survive and compete against the flood of Chinese imports and others. Substitute products made from plastic, metal or wood are a common place and normally cheaper due to mass production and human rights violations. Politicians don’t care about the disappearance of many of America’s Cottage Industries and most consumers don’t care as well.
Here’s a traditional Swedish farm accessory for gunk-laden soles. The dimensions are not critical, but be sure the edges of the slats are fairly sharp?they’re what makes the boot scraper work. Cut slats to length, then cut triangular openings on the side of a pair of 2x2s. A radial arm saw works well for this, but a table saw or band saw will also make the cut. Trim the 2x2s to length, predrill, and use galvanized screws to attach the slats from underneath. If you prefer a boot cleaner that has brushes, check out this clever project.
$1250.00 (Includes All Materials) . $300.00 Deposit (Balance due 30 days before class) This six day sculpted chair class will definitely broaden and raise your woodworking skills a few notches. The class will cover topics such as chair joinery, design, placement of back spindle for comfort, defining hard and soft lines, sculpting using various methods such as grinder, rasps, gouges, scrapers and spoke shaves. Cherry wood will be prepared for you before you arrive to save…
With a variety of styles covering every skill level, the Great Book of Woodworking Projects has something for everyone. Whether you want a challenging project that will beautify your home, such as a stunning Stickley chest of drawers, or you need a quick and easy project for a gift, such as a keepsake box or picture frame, you will find plans that will take a few hours or a weekend to complete.
$1320.00 (Includes all Materials) . $300.00 Deposit (Balance due 30 days before class) This is one of our more popular classes. This beautiful table is well proportioned, with simple elegant lines that will grace any home. It can be used as a hall table, sofa table or an entry table. Imagine what your guest will say when they are welcome into your home and met with this stunning piece of furniture. This class covers all…
The items you’ll need for this project include wood board, power drill, tape measure, adhesive, etc. Read the tutorial for details. Follow the steps properly to make a nice and strong wall rack. This rack makes use of magnets to hold metal items. The tutorial explains the procedure for building this beautiful wall rack. Make sure to use only high quality items for any woodworking project. Use the rack only to hang items that are not too heavy for the magnet to hold. Also, be careful while working around this wall rack and beware of the knives falling off the rack.
There are many ways to learn woodworking. Books and DVDs are a great source of information, and there's nothing wrong with trial ans error. But if you really want to sharpen your skills or pick up a new technique, nothing beats a woodworking class. If you live within traveling distance of one of the many Rockler Woodworking and Hardware store's that offer classes, you're really in luck. The woodworking classes held at Rockler retail stores are taught by experienced woodworkers who are enthusiastic about their craft. Class sizes are small - 10 students or less in most cases - so you can expect the kind of individualized instruction that really helps when you're learning something new. Here's a sample of the great woodworking instruction upcoming at Rockler retail stores around the country:
To corral shelf-dwelling books or DVDs that like to wander, cut 3/4-in.-thick hardwood pieces into 6-in. x 6-in. squares. Use a band saw or jigsaw to cut a slot along one edge (with the grain) that’s a smidgen wider than the shelf thickness. Stop the notch 3/4 in. from the other edge. Finish the bookend and slide it on the shelf. Want to build the shelves, too? We’ve got complete plans for great-looking shelves here.
Do you want to use an oil stain, a gel stain, a water-based stain or a lacquer stain? What about color? Our ebook tells you what you really need to know about the chemistry behind each wood stain, and what to expect when you brush, wipe or spray it on. It’s a lot simpler than you think! This is the comprehensive guide to all the varieties of stain you will find at the store and how to use them.