Description: New to woodworking or looking to refresh your skills? What to see how someone else would do it? We have different Fundamentals classes where instructors teach you the skills to safely and properly use equipment, tools and jigs. In all classes you will learn about taking rough wood into a finished piece using the planer, jointer, mitersaw and tablesaw. In this class you will make a unique Shaker inspired step stool with a back/handle. Along with the tools listed above you will also use Porter Cable's box joint jig, router table, and a mortiser.
Description: Without a doubt, the tablesaw is the most important power tool in the shop. Safely ripping stock to width, accurately cutting parts to length, cutting angles, bevels and making tenons and tapers are just a few of the tasks that an accurately set up tablesaw excels at. Understanding how the saw works is one of the goals of this new class and basic common sense safety will be covered thoroughly. We will begin with techniques to make safe and specialized cuts such as making accurate tenons and miters. Saw blade selection, dado blades and some of the commercially available accessories will be discussed. We will also demonstrate some basic but important shop made jigs. While this class will mostly be dom only, students will have the opportunity to do some cutting on the saw in order to make sure that each participant understands the techniques being shown.
Description: Using the skew is a challenge for many turners. This class will demystify the skew and show you how to avoid the dreaded run back. Proper sharpening and cutting geometry will be demonstrated and students will learn several basic skew cuts - roughing, peeling, planing, bead and cove cuts with the skew. The student will complete the class by turning a small tool handle with just the skew.
Using shelving in your room or kitchen is a great way to arrange and de-clutter space… I know, such ground-breaking term it is. Do not write me off yet, I just want to show you how you can build some clean floating corner shelving that appears to have no brackets. You can create them at no cost, and the hardest part of the plan is figuring out what you are going to put on these shelves when you are finished.
Building a Wooden Office Desk Organizer is an easy task for a professional woodworker, but not so much for normal people like you and me. But that doesn’t mean you cannot do this. Two years ago, I had almost no woodworking experience, but now I make most of my household and office wooden items by myself. This saves me a lot of money. And believe me when I say this; you can also manage to make wonderful wood items with a little practice and some woodworking experience.
Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.