Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.

Another awesome thing about this coffee table is that it is also has a storage unit. So you can store drinks, and other stuff in the half barrel of your table and then close or open it whenever you need. Pete has also constructed a video for this tutorial for which you can find the link below. It illustrates the same process in a video guide that shows you the exact process to be followed while building this whiskey barrel coffee table.
The procedure is very easy to understand and follow for anyone with a little woodworking knowledge. Make sure to collect all the items you need before you start with the project. You may even ask Tracy your queries directly in the comment section of the tutorial post. Or you can ask them here. Either way, I hope that you manage to build this one nicely.
The use of hand tools is often the favorite part of a woodworkers project; hand tools are quiet and demand a level of concentration that makes one forget about everything else. Immerse yourself in this one-day hand tools intensive taught by master craftsman Glen Guarino of Guarino Furniture Designs. Students will start out with a block of wood from...
There are many ways to learn woodworking.  Books and DVDs are a great source of information, and there's nothing wrong with trial ans error.  But if you really want to sharpen your skills or pick up a new technique, nothing beats a woodworking class. If you live within traveling distance of one of the many Rockler Woodworking and Hardware store's that offer classes, you're really in luck.  The woodworking classes held at Rockler retail stores are taught by experienced woodworkers who are enthusiastic about their craft.  Class sizes are small - 10 students or less in most cases - so you can expect the kind of individualized instruction that really helps when you're learning something new. Here's a sample of the great woodworking instruction upcoming at Rockler retail stores around the country:
The tutorial that I am sharing here was written by someone who built this pallet art just to improve the value of a property they wanted to sell fast and they succeed in it. So you can imagine how wonderful this item must look like. I am assuming you do not just want to make this beautiful pallet art so that you can also sell your property easily. Well, whatever your reasons are, this beauty is able to attract anyone who visits your house.

A few days back, I was searching for some cool DIY plans. So, I got to work and ended up coming up with some easy to follow project and an awesome new ice chest cooler to have out on the deck! It was going to be perfect for summer hangouts and barbecues. It was a fun and practical plan to work on and I know you will have fun tackling select a design from this plan and start building your own. Enjoy learning how you can build a rustic cooler also sing the video tutorial and source tutorial plan!


The beauty of this project lies in the simplicity. All you need are 3 pieces of wood of your choice (though we must admit natural hardwoods will look incredible), sanding block, clamps, wood glue and finishing product. The hardest step of the whole tutorial is measuring – as always, measure 9 times, cut once! You wouldn’t want to finish your project and then realize it doesn’t have enough space to fit your DVD player, would you?
This seven-session workshop builds on skills learned during SXW 680 or SXW 686. Students learn additional foundation skills to build wood furniture and related objects incorporating wood physics and joinery concepts. Traditional hand tools including block planes, cabinet scrapers, and spokeshaves are introduced as well as how to safely operate woodworking...
Free next Tuesday evening? The Minneapolis store is offering a class on panel door construction August 1, from 5:00 to 9:00 pm.  You'll learn everything you need to know about this fundamental cabinetmaker's skill to make standard and arched top raised panel doors. August 5 at the Denver store, Cindy Drozda will offer instruction in the techniques she uses to produce her signature style lidded containers (see "Yemaya," above).  This is a great opportunity to learn from a master wood turner who has elevated the craft to the level of fine art.  Students will work on their own projects and most will take home a completed container. Also on August 5, the Phoenix store is offering an advanced turning class.  If you are an intermediate-level wood turner, this would be an excellent opportunity to sharpen your skills and learn techniques that go beyond the basics.
$1555.00 (Includes all Materials)                        . $500.00 Deposit (Balance due 30 days before class) This is perhaps the most difficult class we offer at our school. This class is not for the faint hearted. This chair will challenge every area of your woodworking skill. We will be dealing with angles, proportion, chair design, choosing wood grain, sculpting of the crest rail using an angle grinder, inlay techniques for the back…
Description: Turned wooden bowls can make your dining experience truely memorable or create a display piece to show off your talent. This class will focus on using basic turning tools and techniques to create these wooden bowls. Wood selection and mounting for grain orientation to get the most out of each piece will be discussed along with selection of proper tools. Skills learned in this class will prepare students for our Fingernail Bowl Gouge Class.
Yes Seriously! You can build an easy bed frame yourself without any other’s help. As everyone knows the starting point of any bedroom is a gorgeous bed. However, you also need something that lets you enjoy peaceful slumber in comfort and warmth, but since the bed took as the focal point of the room, you may need something that looks really good too.
We will suggest you select the simple Birdhouse if you are new at woodworking but be sure to select its design with respect to the place where you are going to hang/place it. One of our simple Birdhouse tutorials will help you building one. We have managed to include a source tutorial below that will help you to understand illustrates and the instruction to building a simple Birdhouse.
Making a garden arched footbridge out of some wood boards can be fun, hard working plan and also it’s quite rewarding. We are providing the project tutorial for how to build an arched footbridge without rails or having rails. If you take your hands of work and have some basic woodworking skills you can easily build this type of bridge. While this garden bridge is too small to walk over but it can make a really stunning addition to your lush yard or garden.
The beauty of this project lies in the simplicity. All you need are 3 pieces of wood of your choice (though we must admit natural hardwoods will look incredible), sanding block, clamps, wood glue and finishing product. The hardest step of the whole tutorial is measuring – as always, measure 9 times, cut once! You wouldn’t want to finish your project and then realize it doesn’t have enough space to fit your DVD player, would you?
There’s a lot of space above the shelf in most closets. Even though it’s a little hard to reach, it’s a great place to store seldom-used items. Make use of this wasted space by adding a second shelf above the existing one. Buy enough closet shelving material to match the length of the existing shelf plus enough for two end supports and middle supports over each bracket. Twelve-inch-wide shelving is available in various lengths and finishes at home centers and lumberyards.
Description: Want to learn the basics of wood turning or refresh your skills from Jr. High shop class? This class covers the basics, including shop and lathe safety, tool identification and selection, mounting wood to the lathe and wood selection. In the first half of the class students will turn the handle for a 1/4" turning tool to take home. In the second half they will work on a small project determined by the instructor.
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.

Description: Sharp tools make all aspects of woodworking more enjoyable. But keeping them sharp has been a point of frustration that has steered many away from using them. This class will teach the techniques needed to maintain a sharp edge on your flat bench tools. In this class, all methods of sharpening will be discussed i.e. water stones, oil stones, wet/dry sandpaper, diamond stones and motorized discs. The use of honing compounds and strops will also be discussed. Come out and gain the skill and confidence needed to put a razor edge on all your bench tools.


As soon as I came across this tutorial, I didn’t wait any longer to start building one. Some of the items you need for this project are hardwood plywood, saw, glue, nails, drilling machine, etc. The video is very easy to follow for anyone with basic woodworking knowledge and experience. The first source link also includes a step by step procedure in plain English for those, who are not comfortable enough with the video tutorial.
Our instructors work out of a 27,000 square-foot facility, where over 100 stationary and portable woodworking machines are available. We emphasize hands-on training and real-world experience, and all classes are project-focused. Over forty different classes cover topics including faceframe and frameless cabinet construction, CNC woodworking, architectural millwork, table and casegood construction, hand tools, woodturning, and veneering.
Description: In this workshop, Ray explains the different types and uses of period layout tools. It amazes people to leans how few furniture "Plans" were used in 18th century work. Sketches were made and basic principles were applied to derive at their measurements for quick and efficient use of shop time. Learn what the term "Shop Math" means as Ray demonstrates how to figure out measurements without the use of a ruler.

Description: Without a doubt, the tablesaw is the most important power tool in the shop. Safely ripping stock to width, accurately cutting parts to length, cutting angles, bevels and making tenons and tapers are just a few of the tasks that an accurately set up tablesaw excels at. Understanding how the saw works is one of the goals of this new class and basic common sense safety will be covered thoroughly. We will begin with techniques to make safe and specialized cuts such as making accurate tenons and miters. Saw blade selection, dado blades and some of the commercially available accessories will be discussed. We will also demonstrate some basic but important shop made jigs. While this class will mostly be dom only, students will have the opportunity to do some cutting on the saw in order to make sure that each participant understands the techniques being shown.
Yes Seriously! You can build an easy bed frame yourself without any other’s help. As everyone knows the starting point of any bedroom is a gorgeous bed. However, you also need something that lets you enjoy peaceful slumber in comfort and warmth, but since the bed took as the focal point of the room, you may need something that looks really good too.
×