Drill four 5/8-in.-dia. 1/2-in.-deep holes on the large disc?inside the traced circle?then use 5/8-in. dowel centers to transfer the hole locations to the underside of the small disc. Drill four 1/2-in.-deep holes on the underside of the small disc and a 1/2-in.-deep hole in the center of the top for the dowel handle. Glue in the dowels to join the discs, and glue in the handle. We drilled a wood ball for a handle knob, but a screw-on ceramic knob also provides a comfortable, attractive grip.

Description: Inside out turning, also known as split turned, creates very interesting shapes that leave people wondering how you did that? During this class you will learn the basic concepts on how to design, lay out and turn such a project. This style of turning can be utilized in many projects from vases to ornaments and beyond. Each student will create a decorative flower vase in this class.


Description: This is a more in depth class about bench planes than above. In this class, let period furniture maker Ray Journigan show you how to make using a bench plane your new favorite go to tool. Lean what makes one plane better than another? Then Ray demonstrates the steps of flattening a wide board using hand planes followed by each student having the opportunity to surface a board to "finish ready" without any sanding using their hand planes. In this class we take the plane apart and explain all the adjustments to properly tune up your hand plane. Then block planes are discussed showing their importance in furniture work. Next, for those REALLY interested in learning how different types of handplanes were used, Ray will show and demonstrate the use of specialty planes such as Rabbit planes, Shoulder planes, Dado planes, Dovetail planes, Scraper planes, and molding planes. Lastly we turn our attention to sharpening to a razor edge. Student leave with an eye opening experience having learned thru practice, the joy and ease of using hand planes.
Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!
$50 - $100Alaska Dream HouseBathroomBedroomChildren's and Kid's Room Furniture and Toy PlansCraftroomDesk, Desk Systems and Project Table Plansdining roomentry wayFarmhouse Style Furniture PlansIndustrial Style Furniture PlansKids and Toysliving roomModern Style Furniture PlansNursery and BabyofficeRustic Furniture Plansstorage and organizationTeensIntermediateSide and End Table PlansBuffet, Sideboard and Credenza PlansCabinet PlansNightstands
Description: This class is intended to teach safe knife making to woodworkers of any skill level. Starting with a knife blank, you will learn how to select, prepare and fasten the handle material. Then you will learn how to shape, polish and finish the handle and the metal. Advanced techniques such as folding knives and compound handles may also be taught depending on time. Each student should go home with a completed knife. STUDENT PROVIDES/BUYS KNIFE KIT AND SCALES.

Isn’t this amazing that instead of having to throw that old furniture piece away, you can now reuse it to build something even more beautiful? If you do not like this particular idea, there are many other re-purposeful furniture items you can build from an old dresser. Just search the internet for other DIY project ideas. Here is a link to the video tutorial that explains the same procedure in a more practical manner that you can easily follow through.
There’s a lot of space above the shelf in most closets. Even though it’s a little hard to reach, it’s a great place to store seldom-used items. Make use of this wasted space by adding a second shelf above the existing one. Buy enough closet shelving material to match the length of the existing shelf plus enough for two end supports and middle supports over each bracket. Twelve-inch-wide shelving is available in various lengths and finishes at home centers and lumberyards.
The beauty of this project lies in the simplicity. All you need are 3 pieces of wood of your choice (though we must admit natural hardwoods will look incredible), sanding block, clamps, wood glue and finishing product. The hardest step of the whole tutorial is measuring – as always, measure 9 times, cut once! You wouldn’t want to finish your project and then realize it doesn’t have enough space to fit your DVD player, would you?
Description: Through relief carving, a common piece of flat wood is transformed into your own woodcarving creation. In this class you will learn basic relief carving techniques such as stop cuts, undercutting, and depth and shadows. The application of the skills is universal and can be used in sign making, decorating furniture, picture frames, standalone creations, and more.
The use of hand tools is often the favorite part of a woodworkers project; hand tools are quiet and demand a level of concentration that makes one forget about everything else. Immerse yourself in this one-day hand tools intensive taught by master craftsman Glen Guarino of Guarino Furniture Designs. Students will start out with a block of wood from...
Description: In this two day carving class the student will learn about the different styles of and how ball & claw feet were used on furniture of the 18th century. Come let Master carver and 2018 "Cartouche" winner Ray Journigan guide each student, even those will little carving experience, through the successful execution of carving a Philadelphia style Ball & Claw foot. Methods of layout, clamping, and tool sharpening will also be covered.
$995.00 (Includes all Materials)                                     . $300.00 Deposit (Balance due 30 days before class)     . This Stool was designed by Sam Maloof in 1950's. Sam could often be found sitting on a walnut leather laced stool, talking on the phone in his kitchen. We made several of these stools over the years. Now is your chance to create one of these historic iconic…
Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.
To corral shelf-dwelling books or DVDs that like to wander, cut 3/4-in.-thick hardwood pieces into 6-in. x 6-in. squares. Use a band saw or jigsaw to cut a slot along one edge (with the grain) that’s a smidgen wider than the shelf thickness. Stop the notch 3/4 in. from the other edge. Finish the bookend and slide it on the shelf. Want to build the shelves, too? We’ve got complete plans for great-looking shelves here.
Wall-mounted or placed on a table or countertop, this handsome display cabinet is the perfect way to share any collection while keeping it clean and protected at the same time. Featuring tempered glass doors and three shelves, the cabinet’s design calls for all straight cuts and straightforward construction techniques (simple cut-outs give the effect of
Here’s a traditional Swedish farm accessory for gunk-laden soles. The dimensions are not critical, but be sure the edges of the slats are fairly sharp?they’re what makes the boot scraper work. Cut slats to length, then cut triangular openings on the side of a pair of 2x2s. A radial arm saw works well for this, but a table saw or band saw will also make the cut. Trim the 2x2s to length, predrill, and use galvanized screws to attach the slats from underneath. If you prefer a boot cleaner that has brushes, check out this clever project.

The items you’ll need for this project include wood board, power drill, tape measure, adhesive, etc. Read the tutorial for details. Follow the steps properly to make a nice and strong wall rack. This rack makes use of magnets to hold metal items. The tutorial explains the procedure for building this beautiful wall rack. Make sure to use only high quality items for any woodworking project. Use the rack only to hang items that are not too heavy for the magnet to hold. Also, be careful while working around this wall rack and beware of the knives falling off the rack.
$700.00 (Includes all Materials)                 . $200.00 Deposit (Balance due 30 days before class) In this 4 day class you’ll be able to build this beautiful sharpening pond for your shop. I designed this pond to be a relaxing and stress free place to hone your tools as I believe sharp tools are so important in working wood. Not only are sharp tools a joy to use but they are also safer. In the…
With a variety of styles covering every skill-level, the Great Book of Woodworking Projects has something for everyone. Whether you want a challenging project that will beautify your home, such as a stunning Stickley chest of drawers, or you need a quick and easy project for a gift, such as a keepsake box or picture frame, you will find plans that will take a few hours or a weekend to complete.

This rack can be built from old unused wood pallets you can find around the house. So it is also a great way to recycle those old pallets. You can also find a step by step tutorial at instructables.com for which I have included the source link below. This tutorial helps you to make a wood wine rack from the scratch. So what are waiting for? Just grab the items you need and start building a cool wooden rack for those nice wine bottles of yours.
A woodworker's Workbench is a special type of bench designed to hold your work when you are working on a wood project. The main purpose of this table is to keep the woodwork steady and to prevent it from moving. Follow the tutorial below to build yourself a nice workbench suitable for your specific woodworking projects. Make sure to modify the table to fit your specific requirements.
The beauty of this project lies in the simplicity. All you need are 3 pieces of wood of your choice (though we must admit natural hardwoods will look incredible), sanding block, clamps, wood glue and finishing product. The hardest step of the whole tutorial is measuring – as always, measure 9 times, cut once! You wouldn’t want to finish your project and then realize it doesn’t have enough space to fit your DVD player, would you?
Description: Using the skew is a challenge for many turners. This class will demystify the skew and show you how to avoid the dreaded run back. Proper sharpening and cutting geometry will be demonstrated and students will learn several basic skew cuts - roughing, peeling, planing, bead and cove cuts with the skew. The student will complete the class by turning a small tool handle with just the skew.
Description: Normally we use the lathe to turn perfectly round spindles or vessels "on axis". By changing the axis of rotation during a turning project, very interesting and unusual shapes develop. During this class students will learn the basic concepts that make this style of turning so unique. This knowledge can then be incorporated into your future spindle and face plate projects.
We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
Description: Learn how to create a unique beautiful piece of art, using one of the most versatile and useful tools in the shop. TheBand Saw Box is created from a block of wood that is either laminated or solid, containing drawers or hidden compartments. Students will learn how to plan, layout, cut, and craft an eye-catching project using a minimum of major woodworking tools. This project is a fun method that will increase your Band Saw skills and create fantastic gifts.
​Luckily, we have also managed to find a detailed video tutorial of the Barn door project that illustrates the process of building a Barn door of your own. The steps and instructions in the video tutorial are different from the source links listed above. Actually, you can make different types of designs for your Barn door depending on which one you can afford easily and DIY on your own.
×