Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
If you bought this superb polished table in a store, it would cost you a fortune, but our detailed instructions will help you make one for less than $100. And it looks like highly polished stone, but no-one would know it’s actually made from concrete with a wooden base. Also, you can embellish the top with leaf prints, like the table shown here, or personalize it with glass or mosaic tiles or imprints of seashells.
Description: Lidded boxes are small "Treasure Chests" that can be made in many shapes and sizes on a lathe. They have been made many ways over the years with different options and embellishments. In this class, Dave Robinson breaks lidded box building down to the simplest and fastest method to complete the project. We will explore some of the fancier options that students can take to the next level on their own such as threaded lids, metal, exotic wood, and stone powder inlays. By sticking to the basics and the easiest ways, students will go home with a finished lidded box at the end of this session. Skills developed in this class translate to making a pepper mill and turning a platter or a bowl.
Another wooden item that I love very much is a beautiful mobile holder. You can see one in the image below. These things are not only beautiful, but they can comfortably hold any sized mobile and ensure proper safety. Another amazing thing is that they can be built in many shapes and sizes, as and how you need it. You can see some more examples at the source below
Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
Description: In this workshop, Ray shows and demonstrates the tools used to shape different furniture parts used in 18th century work. Tools such as spokeshaves, rasps and files, drawknives, scrapers, beaders and even some homemade tools that Ray uses to replicate period moldings and other features seen in period work. Other topics for shaping furniture parts will also be discussed such as steambending, bent laminations, and of course, carving.
Description: If you have taken Carving 101 and/or Chip Carving classes and want to work on basic techniques and interesting new patterns to develop your skills, this workshop is for you! Jim will help you refresh basic techniques and sharpen your skills through discussion and demonstration. He will share new patterns and refine your carving technique in a hands on practice clinic. Jim will also provide sharpening instruction to keep your tools cutting clean chips every time.
There is no cost to use the database. Registering is not required. You should be able to browse the database and click through the links. Having said that, considering the fact there are so many browsers out there being used, this site's software might not allow some visitors to browse, it all depends on the Internet traffic, and your browser's compatibility.
Building a wine rack is usually a very common beginner's woodworking plan. Creating a wine rack is an easy plan that can most of the time be completed in a day or half, depending on how large and detailed you would like it to be. And the better news is that this free wine rack plan will let you build you a great looking wine rack for much less than it would cost.
Description: If you have ever tried to sharpen a gouge, you know how frustrating it can be. We will show you how to save yourself time, frustration and money, and learn to grind your turning tools right the first time, every time. Brian will demonstrate various ways to sharpen your turning tools such as your skews, gouges and scrapers using different sharpening systems. If time permits, you will be able to sharpen a few of your own tools under his watchful eye.
Description: This class is designed for beginning woodworkers or those who have been away from their hobby for some time. Students will have a chance to learn about different types of joints using both hand and power tools as they make their own take-home project. The course also covers subjects such as wood technology, selecting and purchasing lumber, sharpening techniques and finishing.
Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!
From the source tutorial, you can get illustrates to the instruction about the plan. Everything is fairly described as diagrams, images, the list of supplies and tools need etc. The process to this plan is very easy to understand and follow for if you are having some basic woodworking knowledge. Make sure to collect all the supplies you need before you start with the project. You may even ask any question directly in the comment section of the tutorial post and also comment the images of your final product if you have completed it. Either way, I hope that you will manage to build this one nicely.​

To corral shelf-dwelling books or DVDs that like to wander, cut 3/4-in.-thick hardwood pieces into 6-in. x 6-in. squares. Use a band saw or jigsaw to cut a slot along one edge (with the grain) that’s a smidgen wider than the shelf thickness. Stop the notch 3/4 in. from the other edge. Finish the bookend and slide it on the shelf. Want to build the shelves, too? We’ve got complete plans for great-looking shelves here.
For your kitchen, it can work as a knife rack. It gives you easy access to all essential tools while saving space. In addition, it adds a nice visual appeal to your kitchen wall. You can customize your wall rack with different materials, designs and styles. I am here sharing the source link to the step by step tutorial about how to make a rustic wall knife rack.
I am sharing here a link to the detailed tutorial written by Pete at diypete.com, who shares the step by step process for making a wonderful barrel coffee table from scratch. He also tells you what items you’ll need for this project and where to find them. For example, you can buy an old whiskey barrel online or from a local whiskey store for a few bucks, if you haven’t already got one.
Description: Computer Numeric Control -- CNC – is a system where a user can conceive & design a project, then let the computer controlled hardware produce it. This class will explore the fundamentals of CNC processing including terminology, concepts, processes & hardware systems. We will work through the basic work flow of manufacturing by CNC by exploring in detail the stages of: concept definition, design, engineering, machining and finish & assembly. Each of these stages will be demonstrated using a project of the student's interest with a goal of completing the finished piece if student load and time permit.
Build your own platform bed frame at your home by following the source linked tutorial given above. The source link also includes more pictures that can help you to build a better bed frame. You can see a step by step set of instructions and guidelines to follow with real life pictures, as well as you can download a PDF file detailing the list of materials and tools you’ll need, know about the length of every board, and most importantly color-coded illustrations of the building process.
×