Description: Sharp tools make all aspects of woodworking more enjoyable. But keeping them sharp has been a point of frustration that has steered many away from using them. This class will teach the techniques needed to maintain a sharp edge on your flat bench tools. In this class, all methods of sharpening will be discussed i.e. water stones, oil stones, wet/dry sandpaper, diamond stones and motorized discs. The use of honing compounds and strops will also be discussed. Come out and gain the skill and confidence needed to put a razor edge on all your bench tools.
You can transfer a graphic on any wood piece of your choice, including a frame, top of a table, etc. The surface should be clean and big enough for the graphic paper. I am also sharing a video tutorial here that explains in detail the process of transferring any graphic to a wooden surface using a freezer paper. Just gather the items you need and follow this video to carve your favorite designs on your favorite wood items.
This corner stone joint of western woodwork has also been used in the Japanese tradition for a long time. Class we will cover: sizing, proportioning, choice of angle, layout and cutting as well as where to use dovetails. You will see examples of full, half blind and blind dovetails. There will be a full cutting and assembly demonstration as well...
I got this idea from a Pinterest post. The final product looks so beautiful that I just couldn’t wait to make one for myself. This was somewhat a different experience from my other regular DIY projects as it doesn’t involve making something from scratch, but turning an existing wood piece into another one. Nonetheless, I enjoyed it very much and the final product was very satisfying. The tutorial I used is linked below.

We have a small dining room area in our farmhouse that is separate from the living room and kitchen. The area is much smaller in space than our last house. I was little confused that our typical rectangular farmhouse table was not going to cut it. So, I walked in I came to know that we needed to build a round dining table. So, I searched for a plan design idea and build a very own round farmhouse dining table. I was an amazing DIY plan, I just love it!


Description: Learn to make a cutting board with various species of wood. You will prepare, glue, cut on a band saw, rout, and finally apply a food-safe finish. This process will result in a stunning cutting board! You will learn how to use a router and one of our templates to make a fun shape or choose to keep a traditional rectangular shape. Some sanding and finishing will need to be completed at home.
Description: A foot stool is a great way to gain skills with hand tools. This useful piece of furniture can be used to rest the feet after a long day or as a sitting stool for that last arriving guest. In this class, after mastering mortise and tenons by hand, Ray will show you how to layout, cut, and shape Queen Anne cabriole legs without the need of a lathe. You may choose to carve ball & claw feet if you have already taken that class! Then, using rasp, spokeshaves, and scrapers, he will show you how to refine the curved shapes. For the more ambitious, Ray will demonstrate carving the applied scalloped shells that can be applied to the aprons and also how to execute the shell on the knees carved in the solid. You don't want to miss this one! It will take your woodworking to the next level! Now you will be ready to tackle the upcoming Queen Anne Side Chair! Tool List: You are encouraged to bring your general woodworking tools along with the following: For the Stool: 5/16" Mortise Chisel 1⁄4", 1⁄2", 3⁄4", 1" bench Chisels (If you have them) Mallet 6" or larger Rule Combination Square Tenon or Dovetail saw #49 or 50 Nicholson rasp or equalivant 10" Med cut cabinet file 8" Smooth cut wood file Spokeshave Square card scraper Smooth plane Block Plane Shoulder Plane Compass Carving parts: (optional): You are encouraged to bring your carving roll with chisels to include the following: 15/6mm v tool 7/14mm gouge (fishtail if purchasing) 2/12mm gouge 8/3mm gouge 2/30mm gouge 8/7mm gouge 5/8mm gouge (fishtail if purchasing) 8/10mm gouge 5/12mm gouge (fishtail if purchasing) 8/13mm gouge 5/25mm gouge 25/10mm Backbend gouge 7/6mm gouge (fishtail if purchasing) 7/10mm gouge (fishtail if purchasing)

The use of hand tools is often the favorite part of a woodworkers project; hand tools are quiet and demand a level of concentration that makes one forget about everything else. Immerse yourself in this one-day hand tools intensive taught by master craftsman Glen Guarino of Guarino Furniture Designs. Students will start out with a block of wood from...
Description: With endless possibilities, your biggest challenge will be deciding what you can do next with your scroll saw. This tool opens up the worlds of intarsia, fretwork, marquetry, and inlay work, just to begin! Learn blade selection, tensioning, and the pros and cons of fixed speed versus various speed saws while making several take-home projects.

Description: Painted furniture is all the rave today. Using Black Dog Furniture Paint, come learn how to transform those yard sale finds, thrift store picks or your grandmother's hand me downs into unique beautiful treasures for your home. Bring a small piece of furniture (chair, small side table etc.) that is good condition (no major repairs etc.) and we will provide the rest of supplies needed to transform your trash to treasure. Student can email a photo of furniture to instructor prior to class to make sure that it is suitable piece to paint). In this class you will learn the basics of prepping, painting, distressing, waxing and sealing.
$700.00 (Includes all Materials)                 . $200.00 Deposit (Balance due 30 days before class) In this 4 day class you’ll be able to build this beautiful sharpening pond for your shop. I designed this pond to be a relaxing and stress free place to hone your tools as I believe sharp tools are so important in working wood. Not only are sharp tools a joy to use but they are also safer. In the…
Description: Want to learn the basics of wood turning or refresh your skills from Jr. High shop class? This class covers the basics, including shop and lathe safety, tool identification and selection, mounting wood to the lathe and wood selection. In the first half of the class students will turn the handle for a 1/4" turning tool to take home. In the second half they will work on a small project determined by the instructor.

With a variety of styles covering every skill level, the Great Book of Woodworking Projects has something for everyone. Whether you want a challenging project that will beautify your home, such as a stunning Stickley chest of drawers, or you need a quick and easy project for a gift, such as a keepsake box or picture frame, you will find plans that will take a few hours or a weekend to complete.
Description: You're not finished until it's finished and this course help add the perfect touch to complete your project. You'll learn the concepts behind finishing, how to prepare your surface, how staining and dye work, and several basic finishes. You will practice the specific skills you need to apply a general purpose finish to your prized projects.
A woodworker's Workbench is a special type of bench designed to hold your work when you are working on a wood project. The main purpose of this table is to keep the woodwork steady and to prevent it from moving. Follow the tutorial below to build yourself a nice workbench suitable for your specific woodworking projects. Make sure to modify the table to fit your specific requirements.
Wall-mounted or placed on a table or countertop, this handsome display cabinet is the perfect way to share any collection while keeping it clean and protected at the same time. Featuring tempered glass doors and three shelves, the cabinet’s design calls for all straight cuts and straightforward construction techniques (simple cut-outs give the effect of
$360.00 (Includes all Materials except the Plane) $100.00 Deposit (Balance due 30 days before class) In this two day class we will reveal some of the secrets to tuning up a Japanese Hand Plane (Kanna) We will start with conditioning the Body of the Plane (DAI) to stabilize movement. Proper sharpening and grinding of the blade and chip breaker will be discussed and demonstrated. Custom fitting the blade to the Dai and conditioning the sole. We will also demystified the…
The space behind a door is a storage spot that’s often overlooked. Build a set of shallow shelves and mount it to the wall behind your laundry room door. The materials are inexpensive. Measure the distance between the door hinge and the wall and subtract an inch. This is the maximum depth of the shelves. We used 1x4s for the sides, top and shelves. Screw the sides to the top. Then screw three 1×2 hanging strips to the sides: one top and bottom and one centered. Nail metal shelf standards to the sides. Complete the shelves by nailing a 1×2 trim piece to the sides and top. The 1×2 dresses up the shelf unit and keeps the shelves from falling off the shelf clips.
Description: The bandsaw is one of your most versatile power tools, and this class will show you how to safely get the most out of it. Steve will show you how to set up your bandsaw for consistent accuracy and teach you proper blade selection. Learn how to perform straight cuts, curves, and how to rough saw cabriole lets. You'll also learn the secrets of resawing: a technique that can save you money and add uniqueness to your projects
$875.00 (Includes all Materials)         . $300.00 Deposit (Balance due 30 days before class) We have an exceptional opportunity offering a class taught by David A Wade, who had worked along side Sam Maloof for over 25 years. David sculpted many of Sam’s creations from the iconic sculpted rocking chair to the sculpted table. Many refer to sculpted Maloof pieces as “sensuous” and are drawn to touch his works. Every woodworker desiring to enhance their craft will benefit…
From the source tutorial, you can get illustrates to the instruction about the plan. Everything is fairly described as diagrams, images, the list of supplies and tools need etc. The process to this plan is very easy to understand and follow for if you are having some basic woodworking knowledge. Make sure to collect all the supplies you need before you start with the project. You may even ask any question directly in the comment section of the tutorial post and also comment the images of your final product if you have completed it. Either way, I hope that you will manage to build this one nicely.​
Description: Spend a weekend with Woodcraft and leave with a traditional Adirondack chair. This course is designed for the entry to intermediate level woodworker who would like to improve their furniture building skills. You will work with both power and hand tools to cut, drill, sand and assemble this classic chair. Instructions, drawings, cypress wood and fasteners are included in the tuition.
$700.00 (Includes all Materials)                 . $200.00 Deposit (Balance due 30 days before class) In this 4 day class you’ll be able to build this beautiful sharpening pond for your shop. I designed this pond to be a relaxing and stress free place to hone your tools as I believe sharp tools are so important in working wood. Not only are sharp tools a joy to use but they are also safer. In the…

$50 - $100Alaska Dream HouseBathroomBedroomChildren's and Kid's Room Furniture and Toy PlansCraftroomDesk, Desk Systems and Project Table Plansdining roomentry wayFarmhouse Style Furniture PlansIndustrial Style Furniture PlansKids and Toysliving roomModern Style Furniture PlansNursery and BabyofficeRustic Furniture Plansstorage and organizationTeensIntermediateSide and End Table PlansBuffet, Sideboard and Credenza PlansCabinet PlansNightstands


Copyright 2018 by Cut The Wood. CutTheWood.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, CutTheWood.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.
The beauty of this project lies in the simplicity. All you need are 3 pieces of wood of your choice (though we must admit natural hardwoods will look incredible), sanding block, clamps, wood glue and finishing product. The hardest step of the whole tutorial is measuring – as always, measure 9 times, cut once! You wouldn’t want to finish your project and then realize it doesn’t have enough space to fit your DVD player, would you?
Description: If you have ever tried to sharpen a gouge, you know how frustrating it can be. We will show you how to save yourself time, frustration and money, and learn to grind your turning tools right the first time, every time. Brian will demonstrate various ways to sharpen your turning tools such as your skews, gouges and scrapers using different sharpening systems. If time permits, you will be able to sharpen a few of your own tools under his watchful eye.

Description: In this class, Ray explains through demonstration the proper use, the making of all the joints used in 18th century furniture construction. The different types of dovetails, mortise and tenons, bridle joints, and others. While machine alternative methods will be discussed our focus will be on the use of hand tools to cut each joint. After watching the procedure demonstrated each student will be coached through their first attempt at each joint using their own hand tools. Learn how to properly and accurately layout and cut the perfect fitting joint! The best part is that these methods can be used on any style of furniture you wish to make ensuring they will last well over 200 years!
$360.00 (Includes all Materials)               . $100 Deposit (Balance due 30 days before class) There is nothing like the experience of using sharp tools. Where the actual tool does what you want it to do with ease. You should not have to fight with your tools. They should work for you and with you. In this class, we will cover a variety of techniques for sharpening edge tools including the use of Japanese water stones.…
Description: In this two day carving class the student will learn about the different styles of and how ball & claw feet were used on furniture of the 18th century. Come let Master carver and 2018 "Cartouche" winner Ray Journigan guide each student, even those will little carving experience, through the successful execution of carving a Philadelphia style Ball & Claw foot. Methods of layout, clamping, and tool sharpening will also be covered.
Some tools required for this project are hole saw, drilling machine, pencil, tape measure, clamps, etc. This tutorial explains every step properly with images so that anyone can make a wooden sofa sleeve easily. Those, who prefer a video tutorial, can visit the below link to a YouTube video that illustrates the process of building a DIY Sofa Sleeve Cupholder.
As soon as I came across this tutorial, I didn’t wait any longer to start building one. Some of the items you need for this project are hardwood plywood, saw, glue, nails, drilling machine, etc. The video is very easy to follow for anyone with basic woodworking knowledge and experience. The first source link also includes a step by step procedure in plain English for those, who are not comfortable enough with the video tutorial.

We will suggest you select the simple Birdhouse if you are new at woodworking but be sure to select its design with respect to the place where you are going to hang/place it. One of our simple Birdhouse tutorials will help you building one. We have managed to include a source tutorial below that will help you to understand illustrates and the instruction to building a simple Birdhouse.
×