The space behind a door is a storage spot that’s often overlooked. Build a set of shallow shelves and mount it to the wall behind your laundry room door. The materials are inexpensive. Measure the distance between the door hinge and the wall and subtract an inch. This is the maximum depth of the shelves. We used 1x4s for the sides, top and shelves. Screw the sides to the top. Then screw three 1×2 hanging strips to the sides: one top and bottom and one centered. Nail metal shelf standards to the sides. Complete the shelves by nailing a 1×2 trim piece to the sides and top. The 1×2 dresses up the shelf unit and keeps the shelves from falling off the shelf clips.
Description: Come spend some time with us and make a small (about sixteen inch tall) three legged stool. A perfect size to use as a foot stool or as a fire side stool. This class will teach a multitude of turning skills, from face plate and spindle turning to duplicating and assembly. Finishing options will also be discussed. The skills and knowledge learned can be used to make taller stools and may also be used for other turned furniture projects. Turning tools will be provided but you may bring your own.
Description: Learn the art of decorating wood with burning from craftsmen, Jim Vogel. Jim will introduce you the basic skills you will need to know to enjoy the art of Pyrography. Students will learn about the control unit, temperature control, pen and tip selection, and the care and maintenance of the tool and tips. You will also learn to select wood, patterns, and how to transfer patterns to wood. Students will make a practice board and learn the various textures and lines they can create with the basic pens/tips. You will start a small project to complete at home. Woodburning unit and tips will be provided.
Description: You're not finished until it's finished and this course help add the perfect touch to complete your project. You'll learn the concepts behind finishing, how to prepare your surface, how staining and dye work, and several basic finishes. You will practice the specific skills you need to apply a general purpose finish to your prized projects.
A super simple iPad Dock/stand made out of a single block of wood features an angled groove which gets to support the tablet device and a cut in a hole to revise access to the home button of your iPad. It’s possible to drill an access channel in the stand through which you can run a charging cable, although this mini stripped back iPad stand may have very limited functions.
An ideal resource for woodworkers looking for a new project or wanting to spruce up their home! From kitchen improvements and storage solutions to classic furniture in the Craftsman and Adirondack styles, the experts at American Woodworker have provided plans and instructions for building 50 great-looking projects that will improve every space inside and outside your home.
Really nice projects but I wish they didn’t use machines every every single step not everyone has a full commercial shop with huge commercial sized machines that cost thousands of dollars in their house. They need to start focusing on hand tools what what the average person has in their house like table saw and drills and stuff like that not everyone has a massive router table with specialty fence and machine or a commercial band saw or massive commercial table saw or huge joiners and thickness planners. It’s not prectical for most people. The steps are short too like Ok do this whole section on this commercial machine that not average woodworker owns and only someone with a commercial company would even have access to but those people aren’t buying this book because they know how to do these things already they don’t need a book telling them how to do what the legit do as a career. The people buying this book are normal people trying to do this as a hobby for fun at home. So cater to them don’t take a short cut because it’s easy for you to tell someone to do something you can do in two seconds but those people have to somehow figure out how to do this one their own in a way not shown in the book because they don’t have the machines you do. It’s Being lazy and writing a book that’s almost completely useless to someone trying to make these projects. But if I did own all these machines and has all that space and money and materials it’s a good book.
Description: In this class, Ray explains through demonstration the proper use, the making of all the joints used in 18th century furniture construction. The different types of dovetails, mortise and tenons, bridle joints, and others. While machine alternative methods will be discussed our focus will be on the use of hand tools to cut each joint. After watching the procedure demonstrated each student will be coached through their first attempt at each joint using their own hand tools. Learn how to properly and accurately layout and cut the perfect fitting joint! The best part is that these methods can be used on any style of furniture you wish to make ensuring they will last well over 200 years!
As soon as I came across this tutorial, I didn’t wait any longer to start building one. Some of the items you need for this project are hardwood plywood, saw, glue, nails, drilling machine, etc. The video is very easy to follow for anyone with basic woodworking knowledge and experience. The first source link also includes a step by step procedure in plain English for those, who are not comfortable enough with the video tutorial.
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
$1250.00 (Includes All Materials) . $300.00 Deposit (Balance due 30 days before class) This six day sculpted chair class will definitely broaden and raise your woodworking skills a few notches. The class will cover topics such as chair joinery, design, placement of back spindle for comfort, defining hard and soft lines, sculpting using various methods such as grinder, rasps, gouges, scrapers and spoke shaves. Cherry wood will be prepared for you before you arrive to save…
Always nice to see project ideas. Yet, to make a living while woodworking all projects need to be scaled up so that one can actually earn enough to survive and compete against the flood of Chinese imports and others. Substitute products made from plastic, metal or wood are a common place and normally cheaper due to mass production and human rights violations. Politicians don’t care about the disappearance of many of America’s Cottage Industries and most consumers don’t care as well.
Description: Want to learn the basics of wood turning or refresh your skills from Jr. High shop class? This class covers the basics, including shop and lathe safety, tool identification and selection, mounting wood to the lathe and wood selection. In the first half of the class students will turn the handle for a 1/4" turning tool to take home. In the second half they will work on a small project determined by the instructor.
$1125.00 (Includes All Materials) . Deposit $300.00 (Balance due 30 days before class) In this class we will explore the works of one of my favorite woodworkers, George Nakashima. This chair has elegance, simplicity, subtle details, and beauty. Don't let its simplicity fool you. This chair requires great skill and precision to execute. It involves carving and sculpting of the seat with power and hand tools. The complex joinery has to be done accurately to ensure…
Description: The bandsaw is one of your most versatile power tools, and this class will show you how to safely get the most out of it. Mike will show you how to set up your bandsaw for consistent accuracy and teach you proper blade selection. Learn how to perform straight cuts, curves, and how to rough saw cabriole lets. You'll also learn the secrets of resawing: a technique that can save you money and add uniqueness to your projects
Cerritos College Woodworking, one of the finest woodworking schools in Southern California, offers classes in furniture making, cabinetmaking, CNC woodworking, and related topics. Cerritos is the school for you, whether your goal is to acquire new knowledge, gain confidence in or improve your skills, enter the field of professional woodworking, or develop a rewarding hobby.
Our instructors work out of a 27,000 square-foot facility, where over 100 stationary and portable woodworking machines are available. We emphasize hands-on training and real-world experience, and all classes are project-focused. Over forty different classes cover topics including faceframe and frameless cabinet construction, CNC woodworking, architectural millwork, table and casegood construction, hand tools, woodturning, and veneering.
Description: Computer Numeric Control -- CNC – is a system where a user can conceive & design a project, then let the computer controlled hardware produce it. This class will explore the fundamentals of CNC processing including terminology, concepts, processes & hardware systems. We will work through the basic work flow of manufacturing by CNC by exploring in detail the stages of: concept definition, design, engineering, machining and finish & assembly. Each of these stages will be demonstrated using a project of the student's interest with a goal of completing the finished piece if student load and time permit.
This rack can be built from old unused wood pallets you can find around the house. So it is also a great way to recycle those old pallets. You can also find a step by step tutorial at instructables.com for which I have included the source link below. This tutorial helps you to make a wood wine rack from the scratch. So what are waiting for? Just grab the items you need and start building a cool wooden rack for those nice wine bottles of yours.
$875.00 (Includes all Materials) . $300.00 Deposit (Balance due 30 days before class) Good joinery is key to making fine furniture that will last for generations. Many of us are intimidated by the complexity of these joints. In this class we hope to de-mystify and simplify the joinery process. We will learn western and eastern joinery and their applications, including dovetails, half-blind dovetails, sliding dovetails, mortise-and-tenons, angled mortise-and-tenons, lap joints, bridle joints, miter joints, scarf joints,…
Relax and enjoy your outdoor space with this smart patio combo consisting of a sofa and chair. You can adjust the size completely to make it fit perfectly onto your patio or deck, and both the sofa and chair have arms that double as trays for al fresco dining. And you can make your own cushions to fit, or use shop-bought ones and add your own ties, if necessary.
Whether you're new to woodworking or you've been doing it for years, Woodcraft's selection of woodworking projects is one the best places to find your next big project. Whether you're looking to make wooden furniture, pens, toys, jewelry boxes, or any other project in between, the avid woodworker is sure to find his or her next masterpiece here. Find hundreds of detailed woodworking plans with highly accurate illustrations, instructions, and dimensions. Be sure to check out our Make Something blog to learn expert insights and inspiration for your next woodworking project.