Description: In this information packed class, Brian will show you all you need to know to add turned elements to your next furniture project. While basic spindle turning will be covered in depth, you will also learn some unorthodox methods "cheaters" to achieve success. Reproducing parts without a duplicator will be covered. You will also learn what tool to choose for a particular job, how they are sharpened, offset turned legs, split turnings, and much more. With practice exercises, you will gain confidence with the gouge, scraper, and skew. After taking this class you will turn that scrap pile into more money or memories as they become candle stands or chess pieces.

Description: The bandsaw is one of your most versatile power tools, and this class will show you how to safely get the most out of it. Mike will show you how to set up your bandsaw for consistent accuracy and teach you proper blade selection. Learn how to perform straight cuts, curves, and how to rough saw cabriole lets. You'll also learn the secrets of resawing: a technique that can save you money and add uniqueness to your projects


Here, I am writing about another DIY project that involves the use of an old furniture piece. I think that the idea of reusing and recycling old furniture has got to me. Anyways, I am starting to love it. This project involves using an old door to build a beautiful multi picture frame, as you can see in the image below. This frame looks really wonderful and can be used to hold many pictures at a time.
Description: Learn to make a cutting board with various species of wood. You will prepare, glue, cut on a band saw, rout, and finally apply a food-safe finish. This process will result in a stunning cutting board! You will learn how to use a router and one of our templates to make a fun shape or choose to keep a traditional rectangular shape. Some sanding and finishing will need to be completed at home.
Description: Sharp tools make all aspects of woodworking more enjoyable. But keeping them sharp has been a point of frustration that has steered many away from using them. This class will teach the techniques needed to maintain a sharp edge on your flat bench tools. In this class, all methods of sharpening will be discussed i.e. water stones, oil stones, wet/dry sandpaper, diamond stones and motorized discs. The use of honing compounds and strops will also be discussed. Come out and gain the skill and confidence needed to put a razor edge on all your bench tools.
Description: If you have taken Carving 101 and/or Chip Carving classes and want to work on basic techniques and interesting new patterns to develop your skills, this workshop is for you! Jim will help you refresh basic techniques and sharpen your skills through discussion and demonstration. He will share new patterns and refine your carving technique in a hands on practice clinic. Jim will also provide sharpening instruction to keep your tools cutting clean chips every time.
Description: Inside out turning, also known as split turned, creates very interesting shapes that leave people wondering how you did that? During this class you will learn the basic concepts on how to design, lay out and turn such a project. This style of turning can be utilized in many projects from vases to ornaments and beyond. Each student will create a decorative flower vase in this class.
Description: Do you like playing bean bag toss but don't have your own set of boards? Buying a custom set can be expensive. Come take our Bean Bag Toss Game Board Class and we will show you how to make your own set of boards that you can take home and paint however you like. The class will also illustrate how a Kreg Pocket Screw Jig can build a variety of strong joints quickly. Each student will make a set of boards that lock together with storage to hold your bean bags.
Description: In this class you will learn, through demonstrations and exercises, the fundamentals of carving that will provide a solid foundation for all types of carving. Learn about carving materials and tools, how to sharpen and get the most out of each tool, how to read and carve in relation to wood grain, how to set up a work station, and about different styles of carving. Together we'll execute, beads, rosettes, volutes, "C" scroll, and more. You'll leave with the understanding and confidence to grow and explore with this new found skill!
Description: This is a more in depth class about bench planes than above. In this class, let period furniture maker Ray Journigan show you how to make using a bench plane your new favorite go to tool. Lean what makes one plane better than another? Then Ray demonstrates the steps of flattening a wide board using hand planes followed by each student having the opportunity to surface a board to "finish ready" without any sanding using their hand planes. In this class we take the plane apart and explain all the adjustments to properly tune up your hand plane. Then block planes are discussed showing their importance in furniture work. Next, for those REALLY interested in learning how different types of handplanes were used, Ray will show and demonstrate the use of specialty planes such as Rabbit planes, Shoulder planes, Dado planes, Dovetail planes, Scraper planes, and molding planes. Lastly we turn our attention to sharpening to a razor edge. Student leave with an eye opening experience having learned thru practice, the joy and ease of using hand planes.
Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.
Description: The bandsaw is one of your most versatile power tools, and this class will show you how to safely get the most out of it. Steve will show you how to set up your bandsaw for consistent accuracy and teach you proper blade selection. Learn how to perform straight cuts, curves, and how to rough saw cabriole lets. You'll also learn the secrets of resawing: a technique that can save you money and add uniqueness to your projects
$995.00 (Includes all Materials)                                     . $300.00 Deposit (Balance due 30 days before class)     . This Stool was designed by Sam Maloof in 1950's. Sam could often be found sitting on a walnut leather laced stool, talking on the phone in his kitchen. We made several of these stools over the years. Now is your chance to create one of these historic iconic…
Description: If you have taken Carving 101 and/or Chip Carving classes and want to work on basic techniques and interesting new patterns to develop your skills, this workshop is for you! Jim will help you refresh basic techniques and sharpen your skills through discussion and demonstration. He will share new patterns and refine your carving technique in a hands on practice clinic. Jim will also provide sharpening instruction to keep your tools cutting clean chips every time.
Can you believe that this amazing wine rack the image below has been built using old wood pallets? Perhaps you can. Isn’t it wonderful that your old wood pallets can be reused to build something so beautiful and useful? I am not a drinker but I liked the idea so much that I just couldn’t resist making myself one. Although later I gifted it to my parents, who totally loved it.
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
A bottle carrier is a bucket like carrier used to carry beer bottles and so. Yes, the same one you must have used to carry your six-pack. Drinker or not, a bottle carrier is a useful item for everyone. It can be used to carry around or store small items around a household. And it is also very easy to build one. I have several of these lying around my house. Also known as wooden beer totes, this is one wood item you will absolutely love to make. It is also super easy to build.
Description: Do you and your significant other want to learn basic wood working skills and have fun creating a one of a kind project together? We will provide the food, soft drinks, and materials. You only need to show up and be ready to make some saw dust. Projects will vary from month to month and will consist of small projects such as pens, bottle stoppers/openers, pepper grinders, etc.
The engineering involved in building this garden bench is pretty simple, and we have provided some links to get a full cut list and plans with photos to help you along the way. Additionally, to the stock lumber, you will need wood screws, barrel locks, and hinges to complete the table. A miter saw or hand saw is also extremely helpful for cutting down your stock to the correct angle and length.
×