Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
Cut the 6-1/2-in. x 3-in. lid from the leftover board, and slice the remaining piece into 1/4-in.-thick pieces for the sides and end of the box. Glue them around the plywood floor. Cut a rabbet on three sides of the lid so it fits snugly on the box and drill a 5/8-in. hole for a finger pull. Then just add a finish and you’ve got a beautiful, useful gift. If you don’t have time to make a gift this year, consider offering to do something for the person. You could offer to sharpen their knives! Here’s how.
We have a small dining room area in our farmhouse that is separate from the living room and kitchen. The area is much smaller in space than our last house. I was little confused that our typical rectangular farmhouse table was not going to cut it. So, I walked in I came to know that we needed to build a round dining table. So, I searched for a plan design idea and build a very own round farmhouse dining table. I was an amazing DIY plan, I just love it!
$375.00 (Includes all Materials)          . $100.00 Deposit  (Balance due 30 days before class) This class will give every student a thorough understanding of the finishing process. It will cover all aspects of wood finishing: Proper sanding techniques, coloring wood (dyes, stains, chemical and plant dyes), color-matching, membrane finishes (shellac, varnish, lacquer) and understanding solvents and their use in the finishing process. We will also explore hand-rubbed finishes, shading and toning, making your own custom stains and…

Description: With endless possibilities, your biggest challenge will be deciding what you can do next with your scroll saw. This tool opens up the worlds of intarsia, fretwork, marquetry, and inlay work, just to begin! Learn blade selection, tensioning, and the pros and cons of fixed speed versus various speed saws while making several take-home projects.
Really nice projects but I wish they didn’t use machines every every single step not everyone has a full commercial shop with huge commercial sized machines that cost thousands of dollars in their house. They need to start focusing on hand tools what what the average person has in their house like table saw and drills and stuff like that not everyone has a massive router table with specialty fence and machine or a commercial band saw or massive commercial table saw or huge joiners and thickness planners. It’s not prectical for most people. The steps are short too like Ok do this whole section on this commercial machine that not average woodworker owns and only someone with a commercial company would even have access to but those people aren’t buying this book because they know how to do these things already they don’t need a book telling them how to do what the legit do as a career. The people buying this book are normal people trying to do this as a hobby for fun at home. So cater to them don’t take a short cut because it’s easy for you to tell someone to do something you can do in two seconds but those people have to somehow figure out how to do this one their own in a way not shown in the book because they don’t have the machines you do. It’s Being lazy and writing a book that’s almost completely useless to someone trying to make these projects. But if I did own all these machines and has all that space and money and materials it’s a good book.
Learn the basics of woodworking with simple hands-on projects to build your confidence and skills. Each lesson in this class explores an area of woodworking that will form the building blocks of all future woodworking projects you undertake. Keeping the average DIY'er in mind, this entire class is conducted using basic handheld power tools, with no fancy fixed tools like table saws, lathes, planers, or drill presses.
Description: Want to learn the basics of wood turning or refresh your skills from Jr. High shop class? This class covers the basics, including shop and lathe safety, tool identification and selection, mounting wood to the lathe and wood selection. In the first half of the class students will turn the handle for a 1/4" turning tool to take home. In the second half they will work on a small project determined by the instructor.
Description: The bandsaw is one of your most versatile power tools, and this class will show you how to safely get the most out of it. Mike will show you how to set up your bandsaw for consistent accuracy and teach you proper blade selection. Learn how to perform straight cuts, curves, and how to rough saw cabriole lets. You'll also learn the secrets of resawing: a technique that can save you money and add uniqueness to your projects

This is one of those things that you never know you need unless you have one. This amazing wooden sofa sleeve works perfectly on either or both sides of a sofa set. It gives your sofa a nice look. The sleeve can also be modified to include a cup holder, mobile holder, etc. You can easily find this item on any online furniture store, but an even better idea is to build one. This way, you can make a sofa sleeve design that you actually like and make space for cup and other things.

These things may be tiny in size, but building one is not that easy. It takes some serious woodworking knowledge and skill to build a nice wooden mobile stand. When I first saw one online, I just couldn’t resist thinking of buying one. But when I saw the price, I was forced to rethink. Also, a woodwork lover like me cannot be contained with just one piece and I was not willing to spend on more than one. So instead I decided to build myself one. Yes, it took some doing but the final result was satisfying. Luckily, I found this awesome tutorial online that helped me build my first ever wooden phone holder.
Isn’t this amazing that instead of having to throw that old furniture piece away, you can now reuse it to build something even more beautiful? If you do not like this particular idea, there are many other re-purposeful furniture items you can build from an old dresser. Just search the internet for other DIY project ideas. Here is a link to the video tutorial that explains the same procedure in a more practical manner that you can easily follow through.
This corner stone joint of western woodwork has also been used in the Japanese tradition for a long time. Class we will cover: sizing, proportioning, choice of angle, layout and cutting as well as where to use dovetails. You will see examples of full, half blind and blind dovetails. There will be a full cutting and assembly demonstration as well...

Description: Come spend some time with us and make a small (about sixteen inch tall) three legged stool. A perfect size to use as a foot stool or as a fire side stool. This class will teach a multitude of turning skills, from face plate and spindle turning to duplicating and assembly. Finishing options will also be discussed. The skills and knowledge learned can be used to make taller stools and may also be used for other turned furniture projects. Turning tools will be provided but you may bring your own.
I got this idea from a Pinterest post. The final product looks so beautiful that I just couldn’t wait to make one for myself. This was somewhat a different experience from my other regular DIY projects as it doesn’t involve making something from scratch, but turning an existing wood piece into another one. Nonetheless, I enjoyed it very much and the final product was very satisfying. The tutorial I used is linked below.
Really nice projects but I wish they didn’t use machines every every single step not everyone has a full commercial shop with huge commercial sized machines that cost thousands of dollars in their house. They need to start focusing on hand tools what what the average person has in their house like table saw and drills and stuff like that not everyone has a massive router table with specialty fence and machine or a commercial band saw or massive commercial table saw or huge joiners and thickness planners. It’s not prectical for most people. The steps are short too like Ok do this whole section on this commercial machine that not average woodworker owns and only someone with a commercial company would even have access to but those people aren’t buying this book because they know how to do these things already they don’t need a book telling them how to do what the legit do as a career. The people buying this book are normal people trying to do this as a hobby for fun at home. So cater to them don’t take a short cut because it’s easy for you to tell someone to do something you can do in two seconds but those people have to somehow figure out how to do this one their own in a way not shown in the book because they don’t have the machines you do. It’s Being lazy and writing a book that’s almost completely useless to someone trying to make these projects. But if I did own all these machines and has all that space and money and materials it’s a good book.

Cerritos College Woodworking, one of the finest woodworking schools in Southern California, offers classes in furniture making, cabinetmaking, CNC woodworking, and related topics.  Cerritos is the school for you, whether your goal is to acquire new knowledge, gain confidence in or improve your skills, enter the field of professional woodworking, or develop a rewarding hobby.
The items you’ll need for this project include wood board, power drill, tape measure, adhesive, etc. Read the tutorial for details. Follow the steps properly to make a nice and strong wall rack. This rack makes use of magnets to hold metal items. The tutorial explains the procedure for building this beautiful wall rack. Make sure to use only high quality items for any woodworking project. Use the rack only to hang items that are not too heavy for the magnet to hold. Also, be careful while working around this wall rack and beware of the knives falling off the rack.
Description: In this class, Ray explains through demonstration the proper use, the making of all the joints used in 18th century furniture construction. The different types of dovetails, mortise and tenons, bridle joints, and others. While machine alternative methods will be discussed our focus will be on the use of hand tools to cut each joint. After watching the procedure demonstrated each student will be coached through their first attempt at each joint using their own hand tools. Learn how to properly and accurately layout and cut the perfect fitting joint! The best part is that these methods can be used on any style of furniture you wish to make ensuring they will last well over 200 years!
Can you believe that this amazing wine rack the image below has been built using old wood pallets? Perhaps you can. Isn’t it wonderful that your old wood pallets can be reused to build something so beautiful and useful? I am not a drinker but I liked the idea so much that I just couldn’t resist making myself one. Although later I gifted it to my parents, who totally loved it.
Really nice projects but I wish they didn’t use machines every every single step not everyone has a full commercial shop with huge commercial sized machines that cost thousands of dollars in their house. They need to start focusing on hand tools what what the average person has in their house like table saw and drills and stuff like that not everyone has a massive router table with specialty fence and machine or a commercial band saw or massive commercial table saw or huge joiners and thickness planners. It’s not prectical for most people. The steps are short too like Ok do this whole section on this commercial machine that not average woodworker owns and only someone with a commercial company would even have access to but those people aren’t buying this book because they know how to do these things already they don’t need a book telling them how to do what the legit do as a career. The people buying this book are normal people trying to do this as a hobby for fun at home. So cater to them don’t take a short cut because it’s easy for you to tell someone to do something you can do in two seconds but those people have to somehow figure out how to do this one their own in a way not shown in the book because they don’t have the machines you do. It’s Being lazy and writing a book that’s almost completely useless to someone trying to make these projects. But if I did own all these machines and has all that space and money and materials it’s a good book.
Some tools that are required for this project are Miter saw, drilling machine, pencil, tape measure, screws, etc. Those, who prefer a video tutorial instead, can visit the below link to a YouTube video tutorial that illustrates the process of creating a DIY Beer Bottle Crate. The video tutorial explains every step properly so that anyone can make a Beer bottle crate easily.
The space behind a door is a storage spot that’s often overlooked. Build a set of shallow shelves and mount it to the wall behind your laundry room door. The materials are inexpensive. Measure the distance between the door hinge and the wall and subtract an inch. This is the maximum depth of the shelves. We used 1x4s for the sides, top and shelves. Screw the sides to the top. Then screw three 1×2 hanging strips to the sides: one top and bottom and one centered. Nail metal shelf standards to the sides. Complete the shelves by nailing a 1×2 trim piece to the sides and top. The 1×2 dresses up the shelf unit and keeps the shelves from falling off the shelf clips.

As you can see in the image, this shelf goes on both sides of the corner wall. It looks beautiful and can be used to organize books, trophies, pictures frames and many other things. The strength and design of the shelf depends on how properly you build it. First time workers definitely need some guidance to help them with the process. Therefore, I am including this basic video that I found on YouTube that demonstrates the process of making corner wall wooden shelves.


Description: Do you like playing bean bag toss but don't have your own set of boards? Buying a custom set can be expensive. Come take our Bean Bag Toss Game Board Class and we will show you how to make your own set of boards that you can take home and paint however you like. The class will also illustrate how a Kreg Pocket Screw Jig can build a variety of strong joints quickly. Each student will make a set of boards that lock together with storage to hold your bean bags.
Description: You're not finished until it's finished and this course help add the perfect touch to complete your project. You'll learn the concepts behind finishing, how to prepare your surface, how staining and dye work, and several basic finishes. You will practice the specific skills you need to apply a general purpose finish to your prized projects.
Although refrigerators long ago rendered them obsolete, antique oak ice boxes remain popular with collectors, even though they’re expensive and hard to find. This do-it-yourself version is neither: it’s both inexpensive and easy to build. An authentic reproduction of an original, the project is especially popular when used as a bar, but it has many

Isn’t this amazing that instead of having to throw that old furniture piece away, you can now reuse it to build something even more beautiful? If you do not like this particular idea, there are many other re-purposeful furniture items you can build from an old dresser. Just search the internet for other DIY project ideas. Here is a link to the video tutorial that explains the same procedure in a more practical manner that you can easily follow through.
Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.

Description: The bandsaw is one of your most versatile power tools, and this class will show you how to safely get the most out of it. Steve will show you how to set up your bandsaw for consistent accuracy and teach you proper blade selection. Learn how to perform straight cuts, curves, and how to rough saw cabriole lets. You'll also learn the secrets of resawing: a technique that can save you money and add uniqueness to your projects
As you can see in the image, this shelf goes on both sides of the corner wall. It looks beautiful and can be used to organize books, trophies, pictures frames and many other things. The strength and design of the shelf depends on how properly you build it. First time workers definitely need some guidance to help them with the process. Therefore, I am including this basic video that I found on YouTube that demonstrates the process of making corner wall wooden shelves.

I got this idea from a Pinterest post. The final product looks so beautiful that I just couldn’t wait to make one for myself. This was somewhat a different experience from my other regular DIY projects as it doesn’t involve making something from scratch, but turning an existing wood piece into another one. Nonetheless, I enjoyed it very much and the final product was very satisfying. The tutorial I used is linked below.
Really nice projects but I wish they didn’t use machines every every single step not everyone has a full commercial shop with huge commercial sized machines that cost thousands of dollars in their house. They need to start focusing on hand tools what what the average person has in their house like table saw and drills and stuff like that not everyone has a massive router table with specialty fence and machine or a commercial band saw or massive commercial table saw or huge joiners and thickness planners. It’s not prectical for most people. The steps are short too like Ok do this whole section on this commercial machine that not average woodworker owns and only someone with a commercial company would even have access to but those people aren’t buying this book because they know how to do these things already they don’t need a book telling them how to do what the legit do as a career. The people buying this book are normal people trying to do this as a hobby for fun at home. So cater to them don’t take a short cut because it’s easy for you to tell someone to do something you can do in two seconds but those people have to somehow figure out how to do this one their own in a way not shown in the book because they don’t have the machines you do. It’s Being lazy and writing a book that’s almost completely useless to someone trying to make these projects. But if I did own all these machines and has all that space and money and materials it’s a good book.
Woodworking classes and seminars from Highland Woodworking. For more than 35 years, we have attracted to Atlanta nationally known woodworking masters and prominent authors including Tage Frid, Sam Maloof, Chris Schwarz, Jeff Miller, Peter Galbert, Roy Underhill and the likes. With the help of numerous other teachers and craftsmen our woodworking programs have inspired and taught thousands of woodworkers to become better at their craft. We consider it great fortune to be in this company and to be able to offer our woodworking classes, seminars and workshops to you. You can check out some of the woodworking action on the Gallery Pages of our site.

Building a bookcase or bookshelf is a fairly simple woodworking plan that you can get done in just a day or two. This is also a low-cost project as well and since the project idea is free, you don't have to worry about busting through your budget. Just follow the simple steps in the tutorial and enjoy your own company building a simple bookcase on this weekend.
×