Description: In this information packed class, Brian will show you all you need to know to add turned elements to your next furniture project. While basic spindle turning will be covered in depth, you will also learn some unorthodox methods "cheaters" to achieve success. Reproducing parts without a duplicator will be covered. You will also learn what tool to choose for a particular job, how they are sharpened, offset turned legs, split turnings, and much more. With practice exercises, you will gain confidence with the gouge, scraper, and skew. After taking this class you will turn that scrap pile into more money or memories as they become candle stands or chess pieces.

$1320.00 (Includes all Materials)             . $300.00 Deposit (Balance due 30 days before class) This is one of our more popular classes. This beautiful table is well proportioned, with simple elegant lines that will grace any home. It can be used as a hall table, sofa table or an entry table. Imagine what your guest will say when they are welcome into your home and met with this stunning piece of furniture. This class covers all…

Really nice projects but I wish they didn’t use machines every every single step not everyone has a full commercial shop with huge commercial sized machines that cost thousands of dollars in their house. They need to start focusing on hand tools what what the average person has in their house like table saw and drills and stuff like that not everyone has a massive router table with specialty fence and machine or a commercial band saw or massive commercial table saw or huge joiners and thickness planners. It’s not prectical for most people. The steps are short too like Ok do this whole section on this commercial machine that not average woodworker owns and only someone with a commercial company would even have access to but those people aren’t buying this book because they know how to do these things already they don’t need a book telling them how to do what the legit do as a career. The people buying this book are normal people trying to do this as a hobby for fun at home. So cater to them don’t take a short cut because it’s easy for you to tell someone to do something you can do in two seconds but those people have to somehow figure out how to do this one their own in a way not shown in the book because they don’t have the machines you do. It’s Being lazy and writing a book that’s almost completely useless to someone trying to make these projects. But if I did own all these machines and has all that space and money and materials it’s a good book.
This super-strong and simple-to-build workbench is may be the project you've been looking for a long time. You have to select some free workbench plans to create yourself a working table in your shed that after you can use it when you are working on your projects and maybe it can provide you some extra storage, depends upon which plan you are choosing to DIY.
Description: In this two day carving class the student will learn about the different styles of and how ball & claw feet were used on furniture of the 18th century. Come let Master carver and 2018 "Cartouche" winner Ray Journigan guide each student, even those will little carving experience, through the successful execution of carving a Philadelphia style Ball & Claw foot. Methods of layout, clamping, and tool sharpening will also be covered.

This seven-session workshop builds on skills learned during SXW 680 or SXW 686. Students learn additional foundation skills to build wood furniture and related objects incorporating wood physics and joinery concepts. Traditional hand tools including block planes, cabinet scrapers, and spokeshaves are introduced as well as how to safely operate woodworking...

Description: Do you and your significant other want to learn basic wood working skills and have fun creating a one of a kind project together? We will provide the food, soft drinks, and materials. You only need to show up and be ready to make some saw dust. Projects will vary from month to month and will consist of small projects such as pens, bottle stoppers/openers, pepper grinders, etc.
Cut the 6-1/2-in. x 3-in. lid from the leftover board, and slice the remaining piece into 1/4-in.-thick pieces for the sides and end of the box. Glue them around the plywood floor. Cut a rabbet on three sides of the lid so it fits snugly on the box and drill a 5/8-in. hole for a finger pull. Then just add a finish and you’ve got a beautiful, useful gift. If you don’t have time to make a gift this year, consider offering to do something for the person. You could offer to sharpen their knives! Here’s how.

Description: In this workshop, Ray shows and demonstrates the tools used to shape different furniture parts used in 18th century work. Tools such as spokeshaves, rasps and files, drawknives, scrapers, beaders and even some homemade tools that Ray uses to replicate period moldings and other features seen in period work. Other topics for shaping furniture parts will also be discussed such as steambending, bent laminations, and of course, carving.
Always nice to see project ideas. Yet, to make a living while woodworking all projects need to be scaled up so that one can actually earn enough to survive and compete against the flood of Chinese imports and others. Substitute products made from plastic, metal or wood are a common place and normally cheaper due to mass production and human rights violations. Politicians don’t care about the disappearance of many of America’s Cottage Industries and most consumers don’t care as well.
Learn the basics of woodworking with simple hands-on projects to build your confidence and skills. Each lesson in this class explores an area of woodworking that will form the building blocks of all future woodworking projects you undertake. Keeping the average DIY'er in mind, this entire class is conducted using basic handheld power tools, with no fancy fixed tools like table saws, lathes, planers, or drill presses.
The beauty of this project lies in the simplicity. All you need are 3 pieces of wood of your choice (though we must admit natural hardwoods will look incredible), sanding block, clamps, wood glue and finishing product. The hardest step of the whole tutorial is measuring – as always, measure 9 times, cut once! You wouldn’t want to finish your project and then realize it doesn’t have enough space to fit your DVD player, would you?
To corral shelf-dwelling books or DVDs that like to wander, cut 3/4-in.-thick hardwood pieces into 6-in. x 6-in. squares. Use a band saw or jigsaw to cut a slot along one edge (with the grain) that’s a smidgen wider than the shelf thickness. Stop the notch 3/4 in. from the other edge. Finish the bookend and slide it on the shelf. Want to build the shelves, too? We’ve got complete plans for great-looking shelves here.
In this 5-day intensive you'll get hands-on training with essential hand tools--back saws, chisels, and planes--while making a classic hardwood mallet with simple and elegant joinery. You'll also learn how to keep your tools sharp and well-tuned. This class provides a solid foundation of skills and techniques for both small projects and more advanced...
Cut the 6-1/2-in. x 3-in. lid from the leftover board, and slice the remaining piece into 1/4-in.-thick pieces for the sides and end of the box. Glue them around the plywood floor. Cut a rabbet on three sides of the lid so it fits snugly on the box and drill a 5/8-in. hole for a finger pull. Then just add a finish and you’ve got a beautiful, useful gift. If you don’t have time to make a gift this year, consider offering to do something for the person. You could offer to sharpen their knives! Here’s how.
Slice, dice and serve in style on this easy, attractive board. We’ll show you a simple way to dry-fit the parts, scribe the arc and then glue the whole thing together. We used a 4-ft. steel ruler to scribe the arcs, but a yardstick or any thin board would also work. Find complete how-to instructions on this woodworking crafts project here. Also, be sure to use water-resistant wood glue and keep your board out of the dishwasher or it might fall apart. And one more thing: Keep the boards as even as possible during glue-up to minimize sanding later. For great tips on gluing wood, check out this collection.
I built my first platform bed by following the steps mentioned in the tutorial and the end result was everything I expected. It was as beautiful as comfortable and strong. It only cost me around $60 to build this one from the scratch. And if I can build it, anyone can. What you need is a little bit of woodworking experience and a lot of confidence. Collect the items as suggested in the video and start working now.
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
Description: Through relief carving, a common piece of flat wood is transformed into your own woodcarving creation. In this class you will learn basic relief carving techniques such as stop cuts, undercutting, and depth and shadows. The application of the skills is universal and can be used in sign making, decorating furniture, picture frames, standalone creations, and more.
Yes Seriously! You can build an easy bed frame yourself without any other’s help. As everyone knows the starting point of any bedroom is a gorgeous bed. However, you also need something that lets you enjoy peaceful slumber in comfort and warmth, but since the bed took as the focal point of the room, you may need something that looks really good too.
×